Kenmore 8674 Use and Care Guide - Page 20

Power TIMED CYCLES @ Jeans* ©Timed Dry Heavy Duty* Express Dry © Air Fluff / DRYER USE Casual OPTIONS • Delicate GuarWd rin1k2l0e O Refresh Touch Up "STEAMCARE DamSpigDnaryl O AUTOCYCLOesr,L¥ SBouuttnodns O Drum Light MODIFIERS _ r_% T,meId ....... cydeI High Medium High Medium Low Extra Low Air Dry A"J°st.l Temperature AaUSTI,SME,c,ycleso_Y More Dry Normal LessDry Dryness Levet Loud Soft Off Cyde Signal u_coc_ b_s%_ _w_ _%_u_'D__'e_, Explosion Hazard Keep flammable materials and vapors, such as gasoline, away from dryer. Do not dry anything that has ever had anything flammable on it (even after washing). Failure to follow these instructions can result in death, explosion, or fire. WARNING: To reduce the risk of fire, electric shock, or injury to persons, read the IMPORTANT SAFETY INSTRUCTIONS before operating this appliance. Follow these basic steps to start your dryer. Please refer to specific sections of this manual for more detailed information. 1. Clean lint screen before each load, See "Cleaning the Lint Screen." 2. Place laundry in dryer and shut door. 3. Press the POWER button. Then rotate the dial to select the desired Auto or SteamCare Cycle. Press button on left of dial to select the desired Timed Cycle. The indicator light for the selected Auto or Timed Cycle will glow green. The indicator light for the selected SteamCare Cycle will glow blue. The preset modifiers for the selected cycle will glow green. Selectable options will glow amber. If an option or modifier is unavailable with the selected cycle, the light will not illuminate. The estimated or actual cycle time (in minutes) will show in the display. To use an Auto Cycle NOTE: A light next to each feature will glow green when the feature is selected or will glow amber when the feature is selectable. 2O Fire Hazard No washer can completely remove oil. Do not dry anything that has ever had any type of oil on it (including cooking oils). Items containing foam, rubber, or plastic must be dried on a clothesline or by using an Air Cycle. Failure to follow these instructions can result in death or fire. • Select an Auto Cycle. • Select DRYNESS LEVEL to adjust how dry you want the load. As the cycle runs, the control senses the dryness of the load and adjusts the time automatically for the selected dryness level. NOTE: Most loads may be dried using the Normal dryness level, which is shown in bold letters on your control panel. Normal is the energy preferred dryness level and will use the least energy. • Select the desired Options. To make changes during an Auto Cycle: • Press STOP once. Adjust Dryness Level. NOTE: Dryness Level selections can be made only while using Auto Cycles. You can select a different dryness level, depending on your load, by pressing Dryness Level and choosing More Dry, Normal or Less Dry. Selecting More Dry, Normal or Less Dry automatically adjusts the sensed time needed. Notma_ I ore Dry Less Dry Dryness Level AU )CvCt S