Kenmore 8674 Use and Care Guide - Page 23
SteamCare Cycles, Preset
View all Kenmore 8674 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 23 highlights
Auto Dry Preset Cycle Settings Auto Cycles Load Type Temperature NORMAL Corduroys, work clothes, sheets Medium Time* (Minutes) 40 JEANS Denim jeans, jackets Medium High 55 HEAVY DUTY High 45 Heavyweight mixed loads, cotton towels, bedspreads CASUAL Low 35 Permanent press, synthetics DELICATE Extra Low 30 Lingerie, blouses, washable knit fabrics *Estimated Time with Auto Dry Level (Normal) setting. Time will vary dependings on load type and load size. SteamCare Cycles Use SteamCare Cycles to help smooth out wrinkles from dry items, such as clothes that have been worn or clothes that have been left in the dryer too long. When the SteamCare Cycle is selected, the estimated time remaining display shows the actual time remaining in the cycle, NOTE: Results may vary depending on fabric. 100% cotton garments with wrinkle-free finish may yield better results than those without. Use of a fabric softener sheet is not recommended with steam cycles as it may cause temporary staining on the clothes. Refresh with SteamCam This cycle is best for smoothing out wrinkles and reducing odors from loads consisting of one to four dry items of wrinkle-free cotton, cotton-polyester blend, common knits and synthetic garments. In this cycle a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool down. The heat level and cycle time are not adjustable. Touch Up with SteamCare This cycle is best for touching up clothes that have been left in the dryer too long. In this cycle, a small amount of water is sprayed into the dryer drum after several minutes of tumbling with heat. The dryer will continue to tumble with heat followed by a brief cool down. The dry time and temperature can be adjusted for this cycle. NOTE: Overloading the dryer may not yield the same results. SteamCare Preset Cycle Settings Timed Cycles Load Type Default Temperature* Default Time (Minutes)* REFRESH Medium High 15 Helps to smooth out wrinkles and reduce odors from loads consisting of one to four dry items. TOUCH UP Medium High 20 Helps to smooth out wrinkles in loads left in the dryer for an extended period. *Temperature and time are selectable only for the Touch Up Cycle. NOTE: The Touch Up cycle has a minimum dry time of 15 minutes and a maximum dry time of 40 minutes. Only the Medium, Medium High, and High temperature settings can be used for the Touch Up cycle. Timed Cycles Use Timed Cycles to select a specific amount of drying time and a drying temperature. When a Timed Cycle is selected, the Estimated Time Remaining display shows the actual time remaining in your cycle. You can change the actual time in the cycle by pressing More Time or Less Time. See "Changing Cycles, Options and Modifiers." Timed Dry Use this cycle to complete drying if items are still damp after an Auto Cycle. Timed Dry is also useful for drying heavyweight and bulky items, such as bedspreads and work clothes. Lightweight garments, such as exercise wear, can be dried using Timed Dry on a low temperature setting. Timed Dry can also be used with the Tumble Free Heated Dryer Rack. EXPRESS DRY TM Use this cycle for drying small loads or loads that need a short drying time. Air Fluff Use this cycle for items that require drying without heat such as rubber, plastic and heat-sensitive fabrics. This table shows examples of items that can be dried using Air Fluff. The temperature setting is not adjustable with this cycle. Type of Load Time* (Minutes) Foam rubber - pillows, padded bras, stuffed toys 20 - 30 Plastic - Shower curtains, tablecloths 20 - 30 Rubber-backed rugs 40 - 50 Olefin, polypropylene, sheer nylon 10 - 20 *Reset cycle to complete drying, if needed. 23