Kenmore 9787 Installation Instructions - Page 3

INSTALLATION INSTRUCTIONS Gather the required tools and parts before starting installation. Read and follow the instructions provided with any tools listed here. Tools needed: 8" or 10" adjustable • wrench (for gas • connections) Flat-blade screwdriver • Adjustable wrench that • opens to 1" (2.5 cm) or 9/16" (14 mm) open-end wrench • (for adjusting laundry center feet) Level • 1/4"nut driver or socket wrench (recommended) • Ruler or measuring tape Knife Vent clamps Pipe-joint compound resistant to LP gas Caulking gun and compound (for installing new exhaust vent) Pliers that open to 19/16'' (3.95 cm) Scissors • Wood block (for leveling) • Tin snips (new vent installation) Parts supplied: Remove parts package from the washer basket. Check that all parts are included. Parts needed: Check local codes and with gas supplier, check existing gas supply, electrical supply and venting, and read "Electrical Requirements," "Gas Supply Requirements" and "Venting Requirements" before purchasing parts. Mobile home installations require special parts (listed following) available for purchase from your local Sears store or Sears Service Center. For further information, please call 1-800-4-MYHOME ® (1-800-469-4663). • Mobile Home Installation Kit. Ask for Part Number 346764. • Metal exhaust system hardware. Parts listed are available from your local Sears store or Sears Service Center. For further information, please call 1-800-4- MY-HOM E®(1-800-469-4663). If You Have You Will Need to Buy Laundry tub or standpipe taller than 96" (2.4 m) Sump pump system (if not already available) 1" (2.5 cm) diameter standpipe 2" (5 cm) diameter to 1" (2.5 cm) diameter standpipe adapter, Part Number 3363920 Overhead sewer Standard 20 gal. (76 L) 34" (86.4 cm) tall drain tub or utility sink and sump pump (available from local plumbing suppliers) D E @ F A. Water inlet hoses (2) B. Inlet hose flat washers (4) C. Front leveling feet with nuts (2) D. Shipping strap (not in parts bag, see "Remove Shipping Strap") E. Drain hose F Silver, double-wire hose clamp Floor drain Drain hose too short Lint clogged drain Water faucets beyond reach of fill hoses Siphon break, Part Number 285320, additional drain hose, Part Number 285702 and connector kit, Part Number 285442 Drain hose, Part Number 285664 and connector kit, Part Number 285442 Drain protector, Part Number 367031 2 longer water fill hoses: 6 ft (1.8 m) Part Number 76314, 10 ft (3.0 m) Part Number 350008