Kenwood DDX370 Instruction Manual - Page 81

Connecting Wires to Terminals Bluetooth Microphone (Accessory 9) DDX790/DDX770/DDX7070BT/ DDX470/DDX4070BT only Antenna Cord Subwoofer Preout (monaural) Purple/White (Reverse sensor wire) Light Green Connect to vehicle's reverse lamp harness when using the optional rear view camera. Extension cable (Accessory 2) (Parking sensor wire) For best safety, be sure to connect the parking sensor. FM/AM antenna input Accessory 1 FUSE ( 10A ) ⁄ Connect to the vehicle's parking brake detection switch harness. White ª / White/black · : To front speaker (left) Gray ª / Gray/black · : To front speaker (right) Green ª / Green/black · : To rear speaker (left) Purple ª / Purple/black · : To rear speaker (right) If no connections are made, do not let the cable come out from the tab. Blue (Antenna control wire) Blue/White (Power control wire) Brown (Mute control wire) Light blue/Yellow (Steering remote control wire) Depending on what antenna you are using, connect either to the control terminal of the motor antenna, or to the power terminal for the booster amplifier of the filmtype antenna. (Max. 300 mA, 12 V) When using the optional power amplifier, connect to its power control terminal. To the terminal that is grounded when either the telephone rings or during conversation. (To connect the Kenwood navigation system, consult your navigation manual.) To use the steering wheel remote control feature, you need an exclusive remote adapter (not supplied) matching your car is required. Orange/White (Dimmer control wire) Red (Ignition wire) Yellow (Battery wire) Black (Ground wire) · (To car chassis) To car light control switch ACC Ignition key switch Car fuse box (Main fuse) Battery English 81