Kenwood DDX370 Instruction Manual - Page 84
Installing/Removing the Unit
View all Kenwood DDX370 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 84 highlights
Installing/Removing the Unit Installing the Unit Installing the Trim Plate 1 Attach accessory 5 to the unit. Bend the tabs of the mounting sleeve with a screwdriver or similar utensil and attach it in place. For more stable attachment the unit (DDX790/ DDX770/DDX7070BT only) Bracket Accessory 8 ⁄ • Make sure that the unit is installed securely in place. If the unit is unstable, it may malfunction (eg, the sound may skip). Installation on Toyota, Nissan or Mitsubishi Car using Brackets Accessory 3 (M5x6mm) or accessory 4 (M5x7mm) Car Bracket Accessory 5 Removing the Trim Plate (DDX470/DDX4070BT/ DDX370/DDX3070 only) 1 Engage the catch pins on the extraction key 6 and remove the two locks on the lower part. Lower the frame and pull it forward as shown in the figure. Accessory 6 Catch Lock ⁄ • The frame can be removed from the top side in the same manner. 2 When the lower part is removed, remove the upper two locations. 84 English Accessory 3 (M5x6mm) or accessory 4 (M5x7mm)