Kenwood DMX8018S Operation Manual

Kenwood DMX8018S Manual

Get Kenwood DMX8018S PDF manuals and user guides View all Kenwood DMX8018S manuals
Add to My Manuals
Save this manual to your list of manuals

Kenwood DMX8018S manual content summary:

  • Kenwood DMX8018S | Operation Manual - Page 1
    DMX8018S MONITOR WITH RECEIVER INSTRUCTION MANUAL • Updated information (the latest Instruction Manual, system updates, new functions, etc.) is available from . © 2018 JVC KENWOOD Corporation B5A-2302-00 b (X)
  • Kenwood DMX8018S | Operation Manual - Page 2
    How to read this manual 4 Basic Operations 5 Functions of the Buttons on the Front Panel.... 5 Turning on the Unit 6 Initial Settings 6 Adjusting the volume 8 Touch screen operations 8 HOME screen descriptions 9 Source selection screen descriptions 9 Source control screen descriptions 11
  • Kenwood DMX8018S | Operation Manual - Page 3
    Effect 51 Listening Position/ DTA 52 Remote control 54 Battery Installation 54 Functions of the Remote control Buttons........54  Connection/Installation 56 Before Installation 56 Installing the unit 57 Troubleshooting 63 Problems and Solutions 63 Error Messages 63 Appendix 64
  • Kenwood DMX8018S | Operation Manual - Page 4
    display when you are driving for any extended period. • If you experience problems during installation, consult your KENWOOD dealer. ÑÑPrecautions on using this unit • When you purchase optional accessories, check with your KENWOOD dealer to make sure that they work with your model and in your area
  • Kenwood DMX8018S | Operation Manual - Page 5
    Operations 12 3 4 5 67 NOTE • The panels shown in this guide are examples used to provide clear explanations of the operations. For this reason (Volume) ATT 4 HOME 5 MENU 6 7 CAM Motion • Receives the remote control signal. • Adjusts volume. The volume will go up until 15 when you keep
  • Kenwood DMX8018S | Operation Manual - Page 6
    for 1 second. NOTE • If it is your first time turning the unit on after installation, it will be necessary to perform Initial setup (P.6). ■■ [Language] Select the language used for the control screen and setting items. Default is "British English (en)". 1 Touch [Language]. 2 Touch [Language Select
  • Kenwood DMX8018S | Operation Manual - Page 7
    ]. NOTE • These settings can be set from the SETUP menu. See Setting Up (P.40). Security Code Setup You can set up a security code to protect your receiver system against theft. When the Security Code function is activated, the code cannot be changed and the function cannot be released. Note the
  • Kenwood DMX8018S | Operation Manual - Page 8
    ] [GPS-SYNC ](Default): Synchronizes the clock time with the GPS. [Manual]: Sets the clock manually. ■■[Time Zone] Select the time zone. ■■[Clock Adjust] If you select [Manual] for Clock, adjust the date and time manually. (P.41) 8 Touch screen operations To perform operations on the screen, you
  • Kenwood DMX8018S | Operation Manual - Page 9
    Source selection screen descriptions You can display all playback sources and options on the source selection screen. 1 2 4 5 6 7 1 • Displays the control screen of current source. • The artwork is displayed if available from current content. 2 • Widget --You can change the widget by touching
  • Kenwood DMX8018S | Operation Manual - Page 10
    HOME screen. You can change items displayed on this area by customizing the source selection screen. (P.11) To select the playback source on the source control screen Display source selection buttons by touching [ ]/[ ] or flicking left or right on the source
  • Kenwood DMX8018S | Operation Manual - Page 11
    and so on. -- [ATT]: The attenuator is active. -- [DUAL]: The dual zone function is on. -- [MUTE]: The mute function is active. -- [LOUD]: The loudness control function is on. • Short-cut buttons: The source changes to the one you have set as a short-cut. For the shortcut setting, refer to Customize
  • Kenwood DMX8018S | Operation Manual - Page 12
    display off. (P.12) • Displays the view camera. (P.37) • Displays the SETUP Menu screen. (P.40) • Displays the Audio screen. (P.46) • Displays the control screen of current source. Icon feature differs depending on the source. • Close the popup menu. • See HOME screen descriptions (P.9). Turn off
  • Kenwood DMX8018S | Operation Manual - Page 13
    . You can get directions, make calls, send and receive messages, and listen to the music from iPhone while driving. You can also use Siri voice control to make it easier to operate iPhone. For details about CarPlay, visit https://ssl. apple.com/ios/carplay/. Compatible iPhone devices You can use
  • Kenwood DMX8018S | Operation Manual - Page 14
    Android Auto, visit https:// www.android.com/auto/ and https://support. google.com/androidauto. Compatible Android devices You can use Android Auto . To exit the Android Auto screen 1 Press the [HOME] button. ÑÑUsing voice control 1 Press the [ ] button for 1 second. Press for 1 second To cancel
  • Kenwood DMX8018S | Operation Manual - Page 15
    and control the App on the unit while your smartphone is connected to the USB terminal. ÑÑAvailable Apps You can use the following Apps on this unit. Install the Apps on your smartphone beforehand. WebLink™ WebLink™ enables you to use the following Apps with the unit. • Media player • Yelp • YouTube
  • Kenwood DMX8018S | Operation Manual - Page 16
    controlling the application installed in the iPhone or Android. To enter Spotify source, touch [Spotify] icon in the source selection screen. (P.10) Preparation • Install , compatibility may be impaired or some or all of the services may become unavailable. • Some functions of Spotify cannot be
  • Kenwood DMX8018S | Operation Manual - Page 17
    manual indicates a flash memory device. ●●About file system The file system should be the one of the following. • FAT16 • FAT32 • exFAT • NTFS NOTE • Install the Most functions can be controlled from the source control screen and playback screen. NOTE • Set the remote controller mode switch to AUD
  • Kenwood DMX8018S | Operation Manual - Page 18
    ). Video screen 8 8 9 8 Searching file area (Video file only) Touch to search the next/previous file. 9 Key display area (Video file only) Touch to display the control screen. 18
  • Kenwood DMX8018S | Operation Manual - Page 19
    Search Operation You can search music or video files by the following operations. 1 Touch [1]. 2 Touch [S]. 3 Select the list type. USB ÑÑLink search You can search a file of same artist/album/ genre as the current track. 1 Touch [Link Search]. 2 Touch the desired tag type. You can select from
  • Kenwood DMX8018S | Operation Manual - Page 20
    5s • iPhone 5c • iPhone 5 • iPod touch (6th generation) • iPod touch (5th generation) NOTE • Latest compatible list of iPod/iPhone. For details, see www.kenwood.com/cs/ce/ipod/. • By connecting your iPod/iPhone to this unit with an optional accessory iPod connection cable KCA-iP103, you can supply
  • Kenwood DMX8018S | Operation Manual - Page 21
    mode switch to AUD mode before starting operation, see Switch the operation mode (P.54). Control screen 2 4 3 5 Open the drawer 1 6 4 1 Repeats the current track/album. Each time you touch the key, repeat mode switches in the following sequence; Song repeat ( ), All
  • Kenwood DMX8018S | Operation Manual - Page 22
    iPod/iPhone Search Operation You can search music files by the following operations. 1 Touch [1]. 2 Touch [S]. 3 Select the list type. ÑÑLink search You can search a file of same artist/album/ genre/composer as the current track. 1 Touch [Link Search]. 2 Touch the desired tag type. You can select
  • Kenwood DMX8018S | Operation Manual - Page 23
    icon in the source selection screen. (P.10) NOTE • Set the remote control mode switch to AUD mode before starting operation, see Switch the operation mode Tunes in stations in memory one after another. • [MANUAL]: Switches to the next frequency manually. 3 Band button Switches the band (FM1/ FM2/
  • Kenwood DMX8018S | Operation Manual - Page 24
    by program type (FM only) You can tune to a station with a specific program type when listening to FM. 1 Touch [PTY]. hhAuto memory starts. ÑÑManual memory You can store the current receiving station in memory. 1 Touch desired band key. 2 Select a station you wish to store in memory. 3 Touch
  • Kenwood DMX8018S | Operation Manual - Page 25
    the same Radio Data System network. Default is "OFF". ■■ Regional Sets whether to switch to the station only in the specific region using the "AF" control. Default is "OFF". ■■[LO.S] (FM only) Turns the Local Seek function on or off. ■■ Auto TP Seek When traffic information station reception is poor
  • Kenwood DMX8018S | Operation Manual - Page 26
    ) PBAP (Phonebook Access Profile) Audio player: A2DP (Advanced Audio Distribution Profile) AVRCP (V1.5) (Audio/Video Remote Control Profile) Sound codec SBC, AAC NOTE • The units supporting the Bluetooth function have been certified for conformity with the Bluetooth Standard following the procedure
  • Kenwood DMX8018S | Operation Manual - Page 27
    the Bluetooth device 1 Search the unit ("DMX8018S") from your smartphone/cell-phone. 2 Input the PIN Code in your smartphone/ cell-phone. PIN Code is set to "0000" as the default. Bluetooth Control Step 2: Connection settings • When the HFP profile is supported, Hands Free 1 or 2 is automatically
  • Kenwood DMX8018S | Operation Manual - Page 28
    Bluetooth Control Step 3: Phonebook transfer 1 Select if you want to transfer your phonebook data. This message appears if the device supports PBAP. Bluetooth Setup 1 Press the [MENU each setting. • Connect the Bluetooth device (P.29) • Change the PIN Code (P.30) • Change the device name (P.30) 28
  • Kenwood DMX8018S | Operation Manual - Page 29
    device 1 Touch [Select Device] in the Bluetooth SETUP screen. Bluetooth Control To delete the registered Bluetooth device 1 Touch [Delete]. 2 Touch ■■[Audio (A2DP)/App (SPP)] Set to interwork with an application installed in a smartphone or to use as an audio player. 4 Touch [Close]. English 29
  • Kenwood DMX8018S | Operation Manual - Page 30
    Bluetooth Control ÑÑChange the PIN Code 1 Touch [PIN Code] in the Bluetooth SETUP screen. hhPIN Code Set screen appears. 2 Touch and hold [ ]. 3 Input the PIN Code. 4 Touch [SET]. ÑÑChange the device name 1 Touch [Device Name] in the Bluetooth SETUP screen. hhChange Device Name screen appears. 2
  • Kenwood DMX8018S | Operation Manual - Page 31
    (stop). * These items appear only when the audio player which supports AVRCP profile is connected. NOTE • The operation buttons, indications and Depending on your cell-phone or audio player, audio may be heard and controlled but text information may not appear. • If the volume is too low,
  • Kenwood DMX8018S | Operation Manual - Page 32
    Bluetooth Control Using Hands-Free Unit You can use telephone function by connecting [ ]. 2 Select the phone number from the list. hhHands Free screen appears. NOTE • If your mobile phone supports PBAP, you can display the phone book and call lists on the touch panel screen when the mobile phone is
  • Kenwood DMX8018S | Operation Manual - Page 33
    Call using the preset number 1 Touch [ ]. 2 Touch the Name or phone number. Bluetooth Control 5 Select the phone number from the list. Call using the phonebook 1 Touch [ ]. 2 Touch [ ]. 3 Select the initial. NOTE • You can set the list to arrange in
  • Kenwood DMX8018S | Operation Manual - Page 34
    Bluetooth Control ÑÑReceive a call 1 Touch [ ] to answer a phone call or [ ] to reject an incoming call. NOTE • While monitoring the view camera, this screen does not appear even
  • Kenwood DMX8018S | Operation Manual - Page 35
    ÑÑPhone number preset You can register frequently used phone numbers to this unit. 1 Touch [ ]. 2 Touch [Edit]. Bluetooth Control ■■ [Delete] To delete the preset number, touch [Delete] and then touch [OK] on the confirmation screen. ÑÑPhonebook transfer You can transfer the phonebook in your
  • Kenwood DMX8018S | Operation Manual - Page 36
    Bluetooth Control Hands-Free Setup You can perform various setup about handsfree function. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [SETUP]. hhSETUP Menu screen appears. 3 Touch [
  • Kenwood DMX8018S | Operation Manual - Page 37
    ] If you select [CMOS 3-Series Camera] for [Rear Camera], adjusts the CMOS-3xx series with ID 1 ("Rear Camera") set. For details, see the instruction manual of your camera. ■■[Parking Guidelines] You can display parking guidelines to enable easier parking when you shift the gear to the reverse
  • Kenwood DMX8018S | Operation Manual - Page 38
    series with ID 2 ("Front Camera") set. For details, see the instruction manual of your camera. ■■[Front Camera Mirror Image] If you select [Other] adjust the parking guidelines NOTE • Install the rear view camera in the appropriate position according to the instructions supplied with the rear view
  • Kenwood DMX8018S | Operation Manual - Page 39
    play video-recorded data and so on. For details, see the instruction manual of the Dashboard Camera DRV-N520 (optional accessory). NOTE • To and set 3rd Party TV Tuner Control in AV Setup (P.45) to ON. • The TV tuner can be controlled with its supplied remote control through the remote sensor on the
  • Kenwood DMX8018S | Operation Manual - Page 40
    , etc. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Screen Adjustment]. hhScreen Control screen appears. 3 Adjust each item as follows. System Setup NOTE • Each operation in this section Set up camera (P.37) • Set up special (P.42) • Set up Bluetooth (P.28) • Set up security (P.7) 40
  • Kenwood DMX8018S | Operation Manual - Page 41
    as follows. ■■[Steering Remote Controller] Sets the desired function in the steering remote controller. See Learning function of steering remote (P.42 on the User Interface screen. hhTouch Panel Adjust screen appears. 2 Follow the instruction on the screen and touch and hold the center of each [ ]. 2
  • Kenwood DMX8018S | Operation Manual - Page 42
    buttons at a time. In that case, press the all buttons one at a time and after pressing all of them, touch [Learning completed] in Steering Remote Controller Setting screen. However, new functions cannot be learned after this operation. 3 Touch the function you want to set. NOTE • When changing the
  • Kenwood DMX8018S | Operation Manual - Page 43
    the software version. NOTE • For how to update the software, see the relevant update procedure manual which comes with the software. Display Setup 1 [SYNC ](Default): Turns the dimmer function on or off when the vehicle light control switch is turned on or off. ■■[OSD Clock] Select if you want to
  • Kenwood DMX8018S | Operation Manual - Page 44
    Setting Up ÑÑCustomizing the key color You can set the button illumination color. 1 Touch [Key Colour] in the Display screen. 2 Touch the desired color. ÑÑChange wallpaper image or color 1 Touch [Wallpaper Customize] in the Display screen. 2 Select an image. *1 *2 ■■ [User] The color you have
  • Kenwood DMX8018S | Operation Manual - Page 45
    clockwise. • Touching [ ] rotates clockwise. • Picture files: JPEG (.jpg, .jpeg), PNG (.png), BMP (.bmp) hhAV screen appears. 4 Set each item as follows. ■■[TV Tuner Control] Sets when connecting the TV tuner to AV INPUT. [ON]: Set to ON when connecting the 3rd party TV tuner. AV-IN1 Name is set
  • Kenwood DMX8018S | Operation Manual - Page 46
    hhA confirmation screen appears. 6 Touch [Yes]. NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Zone Control --Fader of Controlling General Audio --Front focus of Listening Position/ DTA --Select the speakers to output the sound from cell-phone of Blutooth
  • Kenwood DMX8018S | Operation Manual - Page 47
    for each channel) to have the highest surround effects. 5 Touch the speaker (1) you wish to adjust and set each item (2) as follows. 1 2 Controlling Audio ■■[Tweeter] (Only for Front) You can set the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ [X`over] Displays the
  • Kenwood DMX8018S | Operation Manual - Page 48
    Controlling Audio ÑÑCrossover network setup You can set a crossover frequency of speakers. 1 Touch [X`over]. *3 Only when "Subwoofer" is set to a mode other than "None" in [Speaker
  • Kenwood DMX8018S | Operation Manual - Page 49
    the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Fader / Balance]. 4 Set each item as follows. Controlling Audio Equalizer Control You can adjust equalizer by selecting the optimized setting for each category. 1 Press the [MENU] button. hhPopup menu appears
  • Kenwood DMX8018S | Operation Manual - Page 50
    Controlling Audio ■■[SW Level] Adjusts the subwoofer volume. This setting is not available when subwoofer is set to "None". See Speaker/ X'over setup (P.47). ÑÑRecall the
  • Kenwood DMX8018S | Operation Manual - Page 51
    zone function is set to on, the following functions are not available. --Output from the subwoofer --Subwoofer Level/ Bass Boost (P.51) --Equalizer Control/ Sound Effect/ Listening Position (P.49, 51, 52) --Speaker Setup (P.47) --High-resolution Sound Source File Playback • You cannot select iPod if
  • Kenwood DMX8018S | Operation Manual - Page 52
    Position/ DTA screen. 2 Select listening position from [Front R] (Right front), [Front L] (Left front), [Front All] (All front), and [All]. Position DTA control You can fine-adjust your listening position. 1 Touch [Adjust]. 2 Touch [Delay]. 3 Touch [T] or [U] to adjust the delay time of the selected
  • Kenwood DMX8018S | Operation Manual - Page 53
    5 Touch [T] or [U] to adjust the sound level of the selected speaker. Controlling Audio ÑÑFront Focus fine adjustment 1 Touch [Adjust]. 2 Touch [Delay]. 3 Set each item as follows. NOTE • To return to the initial setting of Delay and Level,
  • Kenwood DMX8018S | Operation Manual - Page 54
    • Place the battery out of reach of children. In the unlikely event that a child swallows the battery, immediately consult a physician. Battery Installation If the remote control operates only over shorter distances or does not operate at all, it is possible that the batteries are depleted. In such
  • Kenwood DMX8018S | Operation Manual - Page 55
    by pressing twice. During radio source, switches the seek mode. Screen mode changes each time you press this key during video playback. Displays the control screen of current source. (USB, iPod) Selects the folder to be played. During radio source, select FM/ AM band to be received. Selects the
  • Kenwood DMX8018S | Operation Manual - Page 56
    . For best safety, leave the mounting and wiring work to professionals. • Make sure to ground the unit to a negative 12V DC power supply. • Do not install the unit in a spot exposed to direct sunlight or excessive heat or humidity. Also avoid places with too much dust or the possibility of water
  • Kenwood DMX8018S | Operation Manual - Page 57
    wires of the wiring harness. 4) Connect the wiring harness wires in the following order; ground, battery, ignition. 5) Connect the wiring harness connector to the unit. 6) Install the unit in your car. 7) Reconnect the ¤ terminal of the battery. 8) Perform the Initial Setup. See Initial setup
  • Kenwood DMX8018S | Operation Manual - Page 58
    position of the microphone (accessory 4). 2) Clean the installation surface. 3) Remove the separator of the microphone (accessory 4), and stick the microphone to the place shown below. 4) Wire the microphone cable up to the unit with it secured at several positions using tape or other desired method
  • Kenwood DMX8018S | Operation Manual - Page 59
    Connection/Installation ÑÑConnecting wires to terminals Fuse (15A) White White/Black Gray Gray Accessory) camera control terminal Light Blue/Yellow (Steering remote control wire) REMOTE CONT STEERING WHEEL REMOTE INPUT To steering remote To use the steering wheel remote control feature, you
  • Kenwood DMX8018S | Operation Manual - Page 60
    Connection/Installation ÑÑ3 way speaker system setup Subwoofer Preout Mid Range Preout Tweeter Preout When connecting to an external amplifier, connect its ground wire to the car's chassis
  • Kenwood DMX8018S | Operation Manual - Page 61
    steering remote harness. Contact your KENWOOD Gray) terminal[1] USB (Black) terminal[1] Connection/Installation ÑÑConnecting an iPod/iPhone ●●Lightning connector KCA- the cable if necessary. (Max 500 mA, 5V) [3] See Securing the USB extension cable (P.61). KCA-iP103 (0.8m)[3] iPhone (with
  • Kenwood DMX8018S | Operation Manual - Page 62
    Installation ÑÑConnecting an Android smartphone Micro USB to USB cable[2] Android smartphone[2] Accessory 3 (Gray) (1 m) [3] Accessory 2 (Black) (1 m) [3] USB (Gray) terminal[1] USB (Black) terminal[1] [1] USB maximum power supply current : DC 5 V = 1.5 A [2] Sold separately [3] See Securing
  • Kenwood DMX8018S | Operation Manual - Page 63
    Troubleshooting Problems and Solutions If any trouble occurs, first check the following table for possible problems Set the dual zone function to on. See Zone Control (P.51). • Cannot set up the equalizer. • " message does not disappear, see your nearest KENWOOD dealer. No Device (USB device) The USB
  • Kenwood DMX8018S | Operation Manual - Page 64
    of which is covered with DRM cannot be played. • DSD sound is converted to PCM sound before playback. • The EmChinks tag of DSDIFF is not supported. • Although the audio files are complied with the standards listed above, the play may be impossible depending on the types or conditions of media or
  • Kenwood DMX8018S | Operation Manual - Page 65
    +4dBm (MAX), 0dBm (AVE), Power Class2 Maximum Communication range : Line of sight approx. 10m (32.8 ft) Audio Codec : SBC/ AAC Profile (Multi Profile support) • HFP (V1.6) (Hands Free Profile) • SPP (Serial Port Profile) • A2DP (Advanced Audio Distribution Profile) • AVRCP (V1.5) (Audio/Video Remote
  • Kenwood DMX8018S | Operation Manual - Page 66
    Appendix ■■DSP section Graphics equalizer Band: 13 Band Frequency (BAND1 - 13) : 62.5/ 100/ 160/ 250/ 400/ 630/ 1k/ 1.6k/ 2.5k/ 4k/ 6.3k/ 10k/ 16k Hz Gain : -9/-8/-7/-6/-5/-4/-3/-2/-1/0/1/2/3/4/5/6/7/8/9 dB 2Way X'Over High pass filter Frequency: Through, 30/ 40/ 50/ 60/ 70/ 80/ 90/ 100/ 120/ 150/
  • Kenwood DMX8018S | Operation Manual - Page 67
    ■■General Operating Voltage : 14.4 V (10.5 - 16 V allowable) Maximum Current Consumption : 15 A Installation Dimensions (W × H × D) : 178 × 100 × 155 mm Operational Temperature Range : -10 °C - +60 °C Weight : 1.7 kg NOTE • Although the effective pixels for the liquid crystal panel is given as
  • Kenwood DMX8018S | Operation Manual - Page 68
    and any use of such marks by JVC KENWOOD Corporation is under license. Other trademarks and trade grant permission to use the trade names, trademarks, service marks, or product names of the Licensor (Abalta the **WEBLINK Product**. • YouTube and the YouTube logo are registered trademarks of
  • Kenwood DMX8018S | Operation Manual - Page 69
    provided that the following conditions are met: --Redistributions of source code must retain the above copyright notice, this list of conditions DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
  • Kenwood DMX8018S | Operation Manual - Page 70
    70
  • Kenwood DMX8018S | Operation Manual - Page 71
    English 71
  • Kenwood DMX8018S | Operation Manual - Page 72
  • 1
  • 2
  • 3
  • 4
  • 5
  • 6
  • 7
  • 8
  • 9
  • 10
  • 11
  • 12
  • 13
  • 14
  • 15
  • 16
  • 17
  • 18
  • 19
  • 20
  • 21
  • 22
  • 23
  • 24
  • 25
  • 26
  • 27
  • 28
  • 29
  • 30
  • 31
  • 32
  • 33
  • 34
  • 35
  • 36
  • 37
  • 38
  • 39
  • 40
  • 41
  • 42
  • 43
  • 44
  • 45
  • 46
  • 47
  • 48
  • 49
  • 50
  • 51
  • 52
  • 53
  • 54
  • 55
  • 56
  • 57
  • 58
  • 59
  • 60
  • 61
  • 62
  • 63
  • 64
  • 65
  • 66
  • 67
  • 68
  • 69
  • 70
  • 71
  • 72
B5A-2302-00 b
(X)
© 2018 JVC KENWOOD Corporation
DMX8018S
MONITOR WITH RECEIVER
INSTRUCTION MANUAL
•
Updated information (the latest Instruction Manual, system updates, new
functions, etc.) is available from