Kenwood DMX8018S Operation Manual - Page 47
Speaker/ X’over setup, When Speaker network is set to 3 way
View all Kenwood DMX8018S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 47 highlights
Speaker/ X'over setup 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. hhAudio screen appears. 3 Touch [Speaker/X`over]. 4 Select a car type. You can setup the car type and speaker network, etc. If your car type is selected, the Delay Time Alignment is set automatically (for timing adjustment of sound output for each channel) to have the highest surround effects. 5 Touch the speaker (1) you wish to adjust and set each item (2) as follows. 1 2 Controlling Audio ■■[Tweeter] (Only for Front) You can set the tweeter when you are selecting front speakers. None, Small, Medium, Large ■■ [X`over] Displays the speaker crossover setup screen. You can adjust the crossover setup that was set automatically when you selected the speaker type. For details, see Crossover network setup (P.48) When Speaker network is set to 3 way: 1 2 NOTE • For how to switch to the 3-way speaker system, see 3 way speaker system setup (P.46). Connecting 3-way speakers with the 2-way mode selected can break the speakers. • Select "None" if you have no speakers. ■■ [Speaker] You can select a speaker type and its size to get the best sound effects. When the speaker type and size are set, the speaker crossover network is set automatically. ■■[Location] (Only for Front, Rear) Select the speaker position you have fixed. English 47