Kenwood DMX8018S Operation Manual - Page 57
Installing the unit, Supplied accessories for, installation, Installation procedure, Japanese cars
View all Kenwood DMX8018S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 57 highlights
scars, damage, or failure may result. 0 • Reception may drop if there are metal objects near the Bluetooth antenna. - Connection/Installation x1 Bluetooth antenna unit ÑÑSupplied accessories for installation 1 x1 2 (Black 1 m) x1 3 (Gray 1 m) x1 4 (3 m) x1 5 x1 6 (M5 x 8 mm) x6 7 (M5 x 8 mm) x6 8 x1 ÑÑInstallation procedure 1) To prevent a short circuit, remove the key from the ignition and disconnect the ¤ terminal of the battery. 2) Make the proper input and output wire connections for each unit. 3) Connect the speaker wires of the wiring harness. 4) Connect the wiring harness wires in the following order; ground, battery, ignition. 5) Connect the wiring harness connector to the unit. 6) Install the unit in your car. 7) Reconnect the ¤ terminal of the battery. 8) Perform the Initial Setup. See Initial setup (P.6). Installing the unit ÑÑJapanese cars 6 or 7 Car Bracket ÑÑTrim plate 1) Attach accessory 5 to the unit. 6 or 7 (3.5 m) x1 9 x1 5 English 57