Kenwood DMX8018S Operation Manual - Page 46
Controlling Audio, 3 way speaker system setup
View all Kenwood DMX8018S manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 46 highlights
Controlling Audio Controlling Audio NOTICE • Each operation in this section can be started from the multi function menu. You can adjust the various settings such as audio balance or subwoofer level. 1 Press the [MENU] button. hhPopup menu appears. 2 Touch [Audio]. 3 way speaker system setup Select the appropriate crossover network mode according to the speaker system (2-way speaker system or 3-way speaker system). 1 Press the [HOME] button. hhHOME screen appears. 2 Touch [ ]. hhSource selection screen appears. 3 Touch [STANDBY]. 4 Press the [S (1)] button and the [CAM] (2) button for 1 second at the same time. 1 2 hhSpeaker system select screen appears. 5 Select the crossover network mode. See the following section for each setting. • Set up speaker/ X'over (P.47) • Controlling equalizer (P.49) • Set listening position/ DTA (P.52) • Controlling general audio (Fader / Balance) (P.49) • Set volume offset (P.50) • Performing zone control (P.51) • Set sound effect (P.51) hhA confirmation screen appears. 6 Touch [Yes]. NOTE • When the 3-way speaker system is selected, the following functions are disabled. --Zone Control --Fader of Controlling General Audio --Front focus of Listening Position/ DTA --Select the speakers to output the sound from cell-phone of Blutooth HF/Audio --Beep of User Interface Setup • Connecting 3-way speakers with the 2-way mode selected can break the speakers. 46