Kenwood KDC-X889 Instruction Manual - Page 16

General features Equalizer Control 1 Select the source for adjustment Press the [SRC] button. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "EQ"/"SYS.Q" is displayed above the [3] (KDC-X889/MP828)/[1] (KDC-MP7028/MP728/X789/MP628) button. Refer to (page 9). 3 Enter Equalizer Control mode Press the [3] ("EQ")/[1] ("SYS.Q") button. • When "2 ZONE" of (page 13) is ON, you cannnot select "EQ". (KDC-X889/MP828 only) 4 Select the Equalizer Control item for adjustment Press the [1] - [3]/[5] button. Multi-function key operation [1] "SYS.Q" [2] "F"* [3] "R"* [5] "Preset"* [1] "CALL" [2] "MEM" Equalizer Control Item System Q Setting Equalizer Front Setting Equalizer Rear Setting Call mode Memory mode • * Function of the KDC-X889/MP828 • "Preset": You can store an adjusted equalizer control value by selecting "MEM". Refer to (page 18). Also, you can recall it by selecting "CALL". Refer to (page 18). 5 Adjust the Equalizer control item System Q Setting (Sound Type) Push the Control knob to [4] or [¢]. Each time the knob is pushed, the setting switches as shown below. KDC-X889/MP828 KDC-MP7028/ MP728/X789/MP628 Sound setting Display User memory "USER" Natural "NATURAL" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP 40" Jazz "JAZZ" 16 | English Sound setting Display User memory "USER" Rock "ROCK" Pops "POPS" Easy "EASY" Top 40 "TOP 40" Jazz "JAZZ" Natural "NATURAL" • User memory: The values set on the (page 10/12). • Each setting value is changed with the (KDC-MP7028/MP728/X789/MP628) (page 13) / (KDC-X889/ MP828) (page 15). First, select the speaker type with the Speaker setting. Equalizer Front Setting/ Equalizer Rear Setting (KDC-X889/MP828 only) 1 Select a frequency band you wish to adjust Press the [2] ("F") or [3] ("R") button. Each time the button is pressed, it switches between "Band 1" and "Band 4". 2 Select the adjustment items for Equalizer. Push the Control knob to [FM] or [AM]. Each time the button is pressed, the items that can be adjusted switch as shown below. 3 Adjust the Equalizer. Push the Control knob to [4] or [¢]. Each time the knob is pushed, the setting switches as shown below. Equarizer adjustment item Equalizer Front Frequency/ Equalizer Rear Frequency Equalizer Front Level/ Equalizer Rear Level Equalizer Front Quality/ Equalizer Rear Quality Range Refer to the followings. -9 - +9 0.25/ 0.50/ 1.00/ 2.00 • The frequency which can be selected by each Frequency band is shown below. Band Frequency Band1 60/ 80/ 100/ 120/ 160/ 200 (Hz) Band2 250/ 315/ 400/ 500/ 630/ 800 (Hz)/ 1 (kHz) Band3 1.25/ 1.6/ 2/ 2.5/ 3.15/ 4 (kHz) Band4 5/ 6.3/ 8/ 10/ 12.5/ 16 (kHz) • To get the best sound, first set the Cabin Setting and Speaker Select Front/Rear parameters using the (page 15). 6 Exit Equalizer Control mode (KDC-X889/MP828 only) Press the [6] ("RTN") button.