Kenwood KDC-X889 Instruction Manual - Page 42
Security Code, Touch Sensor Tone, Manual Clock Adjustment, Date Adjustment - code reset
View all Kenwood KDC-X889 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 42 highlights
Menu system In Standby mode Security Code Because authorization by the Security Code is required when it's removed from the vehicle, personalizing this unit is by using the Security Code is a help in preventing theft. Press the Reset button and when it's removed from the battery power source 1 Turn the power ON. 2 Do the step 4 through 7 operation, and enter the Security Code. "Approved" is displayed. The unit can be used. • The setup Security Code can be done when the (page 50) is set as OFF. • When the Security Code function is activated, the code can't be changed and the function can't be released. Note, the Security Code can be set as the 4 digit number of your choice. 1 Enter Standby Press the [SRC] button. Select the "STANDBY" display. 2 Enter Menu mode Press the [MENU] button for at least 1 second. When "Menu" is displayed, "Security" is displayed. 3 Enter Security Code mode Press the Control knob for at least 1 second. When "Enter" is displayed, "Security" is displayed. 4 Select the digits to enter Push the Control knob to [4] or [¢]. 5 Select the Security Code numbers Push the Control knob to [FM] or [AM]. 6 Repeat steps 4 and 5, and complete the Security Code. 7 Confirm the Security Code Press the Control knob for at least 3 seconds. When "Re-Enter" is displayed, "Security" is displayed. 8 Do the step 4 through 7 operation, and reenter the Security Code. "Approved" is displayed. The Security Code function activates. In Standby mode Touch Sensor Tone Setting the operation check sound (beep sound) ON/OFF. Display "Beep : ON" "Beep : OFF" Setting Beep is heard. Beep canceled. In Standby mode Manual Clock Adjustment • This adjustment can be done when the (page 43) is set as OFF. 1 Select Clock Adjustment mode Push the Control knob to [FM] or [AM]. Select the "Clock Adjust" display. 2 Enter Clock Adjust mode Press the Control knob for at least 1 second. The clock display blinks. 3 Adjust the hours Push the Control knob to [FM] or [AM]. Adjust the minutes Push the Control knob to [4] or [¢]. 4 Exit Clock adjustment mode Press the [MENU] button. • When the wrong Code is entered in steps 4 through 6, repeat from step 4. In Standby mode Date Adjustment 1 Select Date Adjust mode Push the knob to [FM] or [AM]. Select the "Date Adjust" display. 42 | English