Kenwood KDC-X889 Instruction Manual - Page 61
Audio file source, HD Radio source, The messages shown below display your, systems condition. - code
View all Kenwood KDC-X889 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 61 highlights
Audio file source ? Cannot play an Audio file. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on (page 7). ? The sound skips when an Audio file is being played. ✔ The media is scratched or dirty. ☞ Clean the media, referring to the CD cleaning of the section on (page 7). ✔ The recording condition is bad. ☞ Record the media again or use another media. ? The Audio file track time isn't displayed correctly. ✔ --☞ There are times when it isn't displayed correctly according to the Audio file recording conditions. HD Radio source ? No sound can be heard, or the volume is low. ✔ The preset broadcast station is not transmitting in the mode that was set with (page 46). ☞ Please set to "Auto". ✔ In digital AM broadcasting, receive mode switches between stereo and monaural too often. ☞ Receiving condition is bad or unstable. Stereo is chosen when receiving condition is good, and it switches to monaural when the condition becomes bad. ✔ HD Radio tuner is connected to KCA-S210A or other units. ☞ Connect the HD Radio tuner directly to the control unit. The messages shown below display your systems condition. Eject: No disc magazine has been loaded in the changer. The disc magazine is not completely loaded. ➪ Load the disc magazine properly. No CD in the unit. ➪ Insert the CD. No Disc: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. TOC Error: No disc has been loaded in the disc magazine. ➪ Load a disc into the disc magazine. The CD is quite dirty. The CD is upsidedown. The CD is scratched a lot. ➪ Clean the CD and load it correctly. Error 05: The CD is upside-down. ➪ Load the CD correctly. Blank Disc: Nothing has been recorded on the MD. No Track: No tracks are recorded on the MD, although it has a title. Error 15: Media was played that doesn't have data recorded that the unit can play. ➪ Use media that has data recorded that the unit can play. No Panel: The faceplate of the slave unit being connected to this unit has been removed. ➪ Replace it. Error 77: The unit is malfunctioning for some reason. ➪ Press the reset button on the unit. If the "Error 77" code does not disappear, consult your nearest service center. Mecha Error: Something is wrong with the disc magazine. Or the unit is malfunctioning for some reason. ➪ Check the disc magazine. And then press the reset button on the unit. If the "Mecha Error" code does not disappear, consult your nearest service center. English | 61