Kenwood KDC-X889 Instruction Manual - Page 38
Category and Channel Search, Direct Access Tuning, Selecting the Preset Band, Channel Preset Memory
View all Kenwood KDC-X889 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 38 highlights
SIRIUS tuner control features Category and Channel Search Selecting the channel and category you want to receive. 1 Enter Category and Channel Search mode Press the Control knob. 2 Select the Category Push the Control knob to [FM] or [AM]. • It is the item when the category of Middle text display part is selected. 3 Select the Channel Push the Control knob to [4] or [¢]. • Channel search cannot be done until the category information is acquired. Cancelling Category and Channel Search mode Press the Control knob. Function of remote Direct Access Tuning Entering the channel and tuning. 1 Enter Direct Access Tuning mode Press the [DIRECT] button on the remote. 2 Enter the channel Press the number buttons. 3 Do Channel Search Push the Control knob to [4] or [¢]. Canceling Direct Access Tuning Press the [DIRECT] button on the remote. • If you make no button operation for 10 seconds, the Direct Access Tuning mode is automatically canceled. • You can set up until Channel number 223. • If there is no signal in the input Channel, "NO CHANNEL" appears. (KTC-SR901: optional accessory) • You cannot search for a channel number which is not broadcasting. (KTC-SR902/KTC-SR903: optional accessory) • If you cannot receive any signal in the input Channel due to a bad condition on radio wave or another problem, "Acquiring Signal" appears. 38 | English Selecting the Preset Band Push the Control knob to [FM]. Each time the knob is pushed, the preset band switches between the SR1, SR2, SR3 and SR4. Channel Preset Memory Putting the channel in the memory. 1 Select the preset band Push the Control knob to [FM]. 2 Select the channel to put in the memory Push the Control knob to [4] or [¢]. 3 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" - "[6]" are displayed above the [1] - [6] buttons. Refer to (page 9). 4 Put the channel in the memory Press the desired [1] - [6] button for at least 2 seconds. The preset number display blinks 1 time. On each band, 1 channel can be put in the memory on each [1] - [6] button. • Only the channel number is stored. Category information is not stored. Preset Tuning Calling up the channels in the memory. 1 Select the preset band Push the Control knob to [FM]. 2 Select the key function section Press the [NEXT] button. Repeatedly press the button until "[1]" - "[6]" are displayed above the [1] - [6] buttons. 3 Call up the channel Press the desired [1] - [6] button.