Kenwood KDC-X889 Instruction Manual - Page 43

2 Enter Date Adjust mode Press the Control knob for at least 1 second. The date display blinks. 3 Selecting the item (day, month, or year) to adjust Push the Control knob to [4] or [¢]. The items that are blinking are items that can be adjusted. 4 Adjust each item Push the Control knob to [FM] or [AM]. 5 Repeat step 3 and 4 operation and adjust the date. 6 Exit Date adjustment mode Press the [MENU] button. In Standby mode Date Mode Setting the date format. 1 Select Date Mode Push the Control knob to [FM] or [AM]. Select the "Date Mode" display. 2 Select the date format Push the Control knob to [4] or [¢]. 3 Exit Menu mode Press the [MENU] button. Function of the KDC-X889/KDC-MP828/KDC-X789 In Standby mode Synchronize Clock Synchronizing the RDS station time data and this unit's clock. Display "SYNC : OFF" "SYNC : ON" Setting Adjust the time manually. Synchronizes the time. In Standby mode DSI (Disabled System Indicator) A red indicator will blink on the unit after the faceplate is removed, warning potential thieves. Display "DSI : ON" "DSI : OFF" Setting LED flashes. LED OFF. In Standby mode Selectable Illumination Selecting the button illumination color as green or red. Display "Button : Red" "Button : Green" Setting The illumination color is red. The illumination color is green. In Standby mode Dimmer Dimming this unit's display automatically when the vehicle light switch is turned ON. Display "Dimmer : ON" "Dimmer : OFF" Setting The display dims. The display doesn't dim. Function of the KDC-MP728/KDC-MP628 In Standby mode Switching preout Switching the preout between the rear and subwoofer. (In subwoofer it outputs without effect from the fader control.) Display "SWPRE : Rear" "SWPRE : Sub-W" Setting Rear preout. Subwoofer preout. • It takes 3 to 4 minutes to synchronize the clock. English | 43