Konica Minolta bizhub 181 IC-206 User Manual - Page 33
Connecting to a local area network (LAN), Connecting the network cable, Network port LEDs
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 33 highlights
1 Getting ready 1.4 Connecting to a local area network (LAN) This machine can transmit with the TCP/IP protocol on a LAN. Therefore, this machine must be connected to the LAN with a network cable. Connecting the network cable Insert one plug on the network cable into the network port (LAN) on the left side of the machine, and then insert the other plug into an available port on the network hub. LED1 LED2 2 Reminder The network cable is not included with this machine; therefore, use Category 5 or 5e cable for the network cable. Network port LEDs LED1 (LINK): This indicator lights up when the network cable is correctly connected. If this indicator does not light up, even if it is assumed that the cable is correctly connected, check the connection again. If this indicator still does not light up, even though both ends are correctly connected, the network cable may damaged. LED2 (ACT): This indicator flashes while data is being sent or received. 1-12 IC-206