Konica Minolta bizhub 181 IC-206 User Manual - Page 344
that appears after clicking NIC and Printer Controller Reset in
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 344 highlights
Using PageScope Web Connection 11 Item Preferred NDS Tree Print Queue Scan Rate(*) Mode(*) Printer Number Connection Mode Description Type in the preferred NDS tree name. (maximum 63 characters, excluding and .) Specify the interval for scanning the print queue. (Range: 1 to 65535 seconds) Select either "PServer" or "Nprinter/Rprinter" as the operating mode for the print server. Type in the Nprinter/Rprinter printer number. (Range: 0 to 254) Specify the NetWare emulation mode. ("Directory Services (NDS)", "Bindery" and "Directory Services/Bindery") 2 Reminder To change the settings on the Network tab, click the [Apply] button, and then, after "Updated Successful" appears, click the [Reset] button on the page that appears after clicking "NIC and Printer Controller Reset" in the menu under "Maintenance" on the System tab; otherwise, the changes to the settings will not be applied. After changing the settings for parameters marked with an asterisk (*), turn this machine off, then on again. The NetWare information that can be specified differs as shown below, depending on the emulation mode and service mode settings selected for NetWare. Service mode Emulation mode NetWare Configuration Frame Type Print Server Name NDS Context Name Print Server Password Password Retype Preferred File Server Nprinter PServer NDS Bindery NDS Bindery Enable NetWare (Select the check box.) Enable NetWare (Select the check box.) AutoDetect (Select the frame type according to the network environment.) AutoDetect (Select the frame type according to the network environment.) Print server name specified on Print server name specified on the NetWare server the NetWare server Name of the context that connects to PServer Not necessary to specify Name of the context that connects to PServer Not necessary to specify Specify only when setting from Specify only when setting from the NetWare server. the NetWare server. Not necessary to specify Name of the file server that connects to PServer Not necessary to specify Name of the file server that connects to PServer IC-206 11-67