Konica Minolta bizhub 181 IC-206 User Manual - Page 70

Network printing 3 3.2 Checking the setup This section provides an overview of the setup procedure that is required for each network printing method. Peer-to-peer printing 1 Connect the network cable. (Refer to "Connecting to a local area net- work (LAN)" on page 1-12.) 2 From the machine's control panel, specify the IP address, subnet mask and default gateway. (Refer to "Specifying an IP address" on page 3-9.) 3 Print the settings information, and then check the settings. (Refer to "Printing the settings information" on page 3-13.) 4 Install the printer driver. The Peer-to-Peer Utility is installed when the printer driver is installed. - For details on installing the PCL driver, refer to "Installing the printer driver by using the Add Printer Wizard" on page 2-15. - If the GDI driver is to be installed, refer to the User's Guide for the GDI printer controller, included with this machine. 5 Add the network port to the computer. (Refer to "Connecting the com- puter and this machine over a network" on page 3-15.) 2 Reminder When installing the printer driver on an operating system other than Windows 98 SE or Windows Me, the Peer-to-Peer Utility is not installed. IC-206 3-5