Konica Minolta bizhub 181 IC-206 User Manual - Page 80
Connecting the computer and this machine over a network, Peer-to-peer printing
View all Konica Minolta bizhub 181 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 80 highlights
Network printing 3 3.5 Connecting the computer and this machine over a network Specify the settings necessary for connecting the computer and this machine over the network and sending a print job through the network from the computer. The following connection procedures are described in this section. - Peer-to-peer printing - Windows 98 SE/Windows Me - LPR printing - Windows 2000 - PORT9100 printing - Windows 2000/Windows XP/Windows Server 2003/Windows Vista - IPP printing - Windows 2000/Windows XP/Windows Server 2003/Windows Vista - Connecting the NetWare server and this machine - Specifying the NetWare 4.x/5.x/6 print server mode settings - Specifying the NetWare 4.x/5.x/6 remote printer mode settings - Specifying the NetWare 5.x/6 Novell Distributed Print Service (NDPS) set- tings - Specifying print settings for the NetWare client (Windows) Peer-to-peer printing Compatible operating systems: Windows 98 SE/ Windows Me 2 Reminder Before specifying settings, check that the following preparations have been completed. The computer can communicate using the TCP/IP protocol. This machine can communicate using the TCP/IP protocol. The printer driver is installed on the computer. (For details on installing the PCL driver, refer to "Installing the printer driver by using the Add Printer Wizard" on page 2-15. If the GDI driver is to be installed, refer to the User's Guide for the GDI printer controller, included with this machine.) 1 On the Start menu, point to "Settings", and then click "Printers" to open the Printers folder. 2 Right-click the icon for the installed printer. 3 Click "Properties" to open the Properties dialog box. IC-206 3-15