Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 215
SNMP Settings]
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 215 highlights
5.7 [Network] tab 5 5.7.8 [SNMP Settings] Configure the settings for SNMP function. Select [Network] ö [SNMP Settings] ö [SNMP Settings]. Item [SNMP] [SNMP v1/v2c(IP)] [SNMP v3(IP)] [SNMP v1(IPX)] [UDP Port] [SNMP v1/v2c Settings] [Read Community Name] [Write] [Write Community Name] [SNMP v3 Settings] Description If [Enable] is selected, SNMP is enabled. If [Enable] is selected, SNMPv1/v2c (IP) is enabled. If [Enable] is selected, SNMPv3 (IP) is enabled. If [Enable] is selected, SNMPv1 (IPX) is enabled. Enter a UDP port number. The currently used port number cannot be specified. Configure the settings for SNMP v1/v2c. Enter a community name used for reading (up to 15 characters, excluding " ' # \ and space). If [Enable] is selected, the Write function is enabled. Enter a community name used for reading and writing (up to 15 characters, excluding " ' # \ and space). Configure the settings for SNMP v3. Control Panel page 4-10 bizhub 42/36 5-127