Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 264
Associating the user with card using authentication device
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 264 highlights
7.1 Using authentication unit 7 14 Turn the Power Switch of this machine off, connect the authentication unit to this machine, and turn the Power Switch of this machine on. NOTICE To turn the Power Switch off and on, first turn the Power Switch off, and then turn it on after 10 or more seconds has elapsed. Not doing so may result in an operation failure. When connecting or disconnecting the USB cable, hold the plug. Otherwise, the machine may be damaged or a failure may occur. Associating the user with card using authentication device When a user and card ID have been registered using Data Administrator, the user must be associated with the card in the Administrator Settings of the machine. 1 Use the Control Panel of this machine to display the Administrator Settings screen. 2 Press [Authentication Setting]. 3 Press [Card Authentication]. 4 Select a user to be registered, and press [OK]. % Press [All] to display all users. Press [Search] to extract target users with search characters. 5 Press [Edit]. % Press [Delete] to cancel the registration when IC card information is already registered. 6 Place the IC card on Working Table WT-510, and press [OK]. % This associates the user with the IC card and registers the IC card for the user. bizhub 42/36 7-15