Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 226
In NetWare 4.x Remote Printer mode NDS, In the NetWare 4.x/5.x/6 Print Server mode NDS
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 226 highlights
5.7 [Network] tab 5 Item [Print Queue Scan Rate] [Bindery/NDS] [Preferred File Server] Description Set a job inquiry interval. Prior check Select [Bindery/NDS]. Enter the priority file server name to be used in the Bindery emulation mode (up to 47 characters, excluding In NetWare 4.x Remote Printer mode (NDS) 1 From the client, log in the NetWare file system with administrator authority. 2 Start NWAdmin. 3 Select an organization or department container for the print service, and select [Print Services Quick Setup] from the Tools menu. 4 Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the [Type] of the printer to [Other/Unknown] and save them. 5 Load the PSERVER.NLM file on the NetWare Server console. Then, configure the following settings in [NetWare Setting]. Item [IPX/SPX] [Ethernet Frame Type] [NetWare Print Mode] [Printer Name] [Printer Number] Description Select [Enable]. Select a frame type to be used. Prior check Frame type Select [NPrinter/RPrinter]. Enter a printer name to be operated as the NPrinter/RPrinter (up to 63 characters, excluding Enter the NPrinter/RPrinter number. The print server name specified in Step 4 In the NetWare 4.x/5.x/6 Print Server mode (NDS) 0 When you select the Print Server mode, the IPX protocol must already be loaded on the NetWare server. 1 From the client, log in the NetWare file system with administrator authority. 2 Start NWAdmin. 3 Select an organization or department container for the print service, and select [Print Services Quick Setup (non-NDPS)] from the Tools menu. 4 Fill in [Print Server Name], [Printer Name], [Print Queue Name], and [Print Queue Volume]. Then, set the [Type] of the printer to [Other/Unknown] and click [Create]. Then, configure the following settings in [NetWare Setting]. Item [IPX/SPX] [Ethernet Frame Type] [NetWare Print Mode] [Print Server Name] Description Select [Enable]. Select a frame type to be used. Select [PServer]. Enter a print server name to be operated as PServer (up to 63 characters, excluding Prior check Frame type The print server name specified in Step 4 bizhub 42/36 5-138