Konica Minolta bizhub 42 bizhub 36/42 Administrator Operations User Guide - Page 64
Enhanced Security Mode], Required settings, Settings to forcibly changed
View all Konica Minolta bizhub 42 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 64 highlights
4.12 [Security Settings] 4 4.12.3 [Enhanced Security Mode] If Enhanced Security settings is enabled, various security functions are configured to allow you to ensure higher-level security of data management. The enhanced security mode cannot be enabled when any of the current functional settings conflict with the enhanced security mode. When the enhanced security mode is enabled, the settings required for the mode or the settings that have been forcibly switched when entering the mode cannot be changed. Required settings To enable the enhanced security mode, the following settings must have been configured. Administrator Settings [Security] / [Authentication] / [General Settings] in PageScope Web Connection [Security Settings] / [Administrator Password] [Security Settings] / [Security Details] / [Password Rules] [Security] / [PKI Settings] / [Device Certificate] in PageScope Web Connection Required settings Select either [Device] or [External Server] (Active Directory) in [User Authentication]. Set a password complying with password rules. Select [ON]. Register a self-signed certificate in order to perform SSL communications. Settings to forcibly changed When the enhanced security is enabled, the following settings are forced. - The changed settings will not revert when the enhanced security mode is turned off. - After the password rules have been changed, any passwords that do not comply with the changed rules will not be authenticated. For details on the password rules, refer to page 4-38. Administrator Settings [Authentication Setting] / [User List Display Setting] [Ethernet] / [TCP/IP] / [Telnet] [Security] / [Authentication] / [General Settings] / [Public Access] in PageScope Web Connection [Security] / [Authentication] / [General Settings] / [Print without Authentication] in PageScope Web Connection [Security] / [PKI Settings] / [SSL/TLS Settings] / [SSL/TLS] in PageScope Web Connection [Security] / [PKI Settings] / [SSL/TLS Settings] / [Encryption strength] in PageScope Web Connection [Network] / [SNMP Settings] / [SNMPv1/v2c Settings] in PageScope Web Connection [Network] / [SNMP Settings] / [SNMPv3 Settings] in PageScope Web Connection Settings to forcibly changed Set to [OFF]. Set to [Disable]. Set to [Restrict]. Set to [Restrict]. Set to [Enable]. Unable to be set to the setting that includes encryption strength lower than [AES-256, 3DES]. [Write] is set to [Disable]. In [Write User], [Security Level] cannot be set to [None]. Specify both of auth-password and auth/privpassword in more than 8 digits. bizhub 42/36 4-39