Konica Minolta bizhub C3100P bizhub C3100P Applied Functions User Guide - Page 17
[Date/Time Settings] - [Daylight Saving Time Settings], [Machine Settings] - sleep mode
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 17 highlights
1.5 Available operations in Administrator mode 1 Item [Port Number] [Time Zone] [Adjustment Time] Description If necessary, change the NTP server port number. Normally, you can use the original port number. [123] is specified by default. Select a time zone (time difference from world standard time) to suit your environment. [GMT] is specified by default. Displays the latest date and time at which time correction was performed by connecting to the NTP server. Tips If time zone is specified, the standard time obtained from the server adjusted to your time zone is specified as the correction time. [Date/Time Settings] - [Daylight Saving Time Settings] To display: Administrator mode - [System] - [Date/Time Settings] - [Daylight Saving Time Settings] Specifies daylight saving time for the current country setting. Item [Daylight Saving Time] Description Select [Enable] to use daylight saving time. Also enter the time to be adjusted for daylight saving time (in minutes). [Disable] is specified by default. [Machine Settings] To display: Administrator mode - [System] - [Machine Settings] - [Machine Settings] Register device information of this machine, such as the name, installed place, and information of the administrator. Item [Device Name] [Device Location] [Device Information] [Administrator Name] [Administrator E-mail Address] [Do Startup Page] [Unit of Measure] [Sleep Mode Time] [Entering Power Save Mode] Description Enter the name of this machine (using up to 127 bytes). Enter the location of this machine (using up to 127 bytes). Enter the information of this machine (using up to 127 bytes). Enter the machine administrator name (using up to 127 bytes). Enter the E-mail address of the machine administrator (using ASCII characters of up to 320 bytes). Select whether or not to print the start page when this machine is turned on. [Off] is specified by default. Select a system of units that are normally used. The default value depends on the region the machine is used in. Change the time required to automatically change to Sleep mode after you did not operate this machine. The default value depends on the region the machine is used in. When this machine receives a print job from a computer in Power Save mode, select the timing to switch to Power Save mode after the print job has completed. • [Normal]: Switches the machine status at the time specified in [Sleep Mode Time]. • [Immediately]: Switches to Power Save mode immediately after a print job has ended. [Immediately] is specified by default. [Applied Functions] 1-12