Konica Minolta bizhub C3100P bizhub C3100P Applied Functions User Guide - Page 29
[IPsec], Click [Edit] from [SA] on the [IPsec Settings] screen
View all Konica Minolta bizhub C3100P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 29 highlights
1.5 Available operations in Administrator mode 1 Item [No Proxy for following domain] Description If necessary, enter the address that does not use the proxy server. Use one of the following formats. • Example of host name entry: "host.example.com" • Example of IP address (IPv4) entry: "192.168.1.1" • Example of IP address (IPv6) entry: "fe80::220:6bff:fe10:2f16" [IPsec] The IPsec technology prevents the falsification or leakage of data on the IP packet basis using encryption technology. Configure the settings if IPsec is installed in your environment. 0 This function is available when an optional Hard Disk is installed. 1 In the administrator mode, select [Security] - [IPsec] - [IPsec], then click [Edit] in [IPsec Settings]. The [IPsec Settings] screen appears. 2 Click [Edit] from [IKEv1] or [IKEv2] on the [IPsec Settings] screen, then configure the following settings. Item [Encryption Algorithm] [Authentication Algorithm] [Encryption Key Validity Period] [Diffie-Hellman Group] [Negotiation Mode] Description Select the encryption algorithm used for generating a common key used in communication. Select the authentication algorithm used for generating a common key used in communication. Enter a validation period of a common key used for encrypted communication. When this period has expired, a new key is created. This can secure the communication. [28800] sec. is specified by default. Select the Diffie-Hellman group. [Group2] is specified by default. Select the method to securely generate a common key used for encrypted communication. This option is available when [IKEv1] is selected in the [IPsec Settings] window. [Main Mode] is selected by default. 3 Click [Edit] from [SA] on the [IPsec Settings] screen, then register the Security Association (SA). % Up to 10 groups can be registered for the [SA]. Item [Name] [Encapsulation Mode] [Security Protocol] [Key Exchange Method] [Tunnel End Point] [IKE Settings] Description Enter the SA name (using up to 10 characters). Select an IPsec operation mode. [Transport] is specified by default. Select a security protocol. [AH] is specified by default. Select the key replacement method to securely create a common key used to encrypt communications. [IKEv1] is specified by default. Enter the IP address of the peer's IPsec gateway. This is required when [Tunnel] is selected in [Encapsulation Mode]. Configure IKE settings used for this SA. This is required when [IKEv1] or [IKEv2] is selected in [Key Exchange Method]. [Applied Functions] 1-24