Konica Minolta bizhub PRESS C6000 bizhub PRESS C6000/C7000 Network Scanner Use - Page 31
Sending to the SMB Server
View all Konica Minolta bizhub PRESS C6000 manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 31 highlights
4.5 Sending to the SMB Server 4 4.5 Sending to the SMB Server You can send the data read in from the copier's ADF or the original scanning glass (scanned data) to the SMB server. The scanned data sent to the SMB server can be file-shared with computers with the SMB protocol. For detailed information on how to operate the function, refer to page 6-22. Oroginal Scan Copier SMB server 4.5.1 Items to be configured In order to send the scanned data to the SMB server, the following items need to be configured. Register Name You specify a register name for the SMB server. Reference Name You specify a reference name as a keyword for searching. Host Address You specify an SMB server name or an IP Address of the SMB server. File Path You specify a directory in the SMB server. Login Name You specify a Login Name for the SMB server. Password You specify a corresponding Password to each Login Name for the SMB server. d Reference You can register a Register Name, Reference Name, Host Address, File Path, Login Name, and Password beforehand. On how to register it, refer to page 5-13. 7 CAUTION - Depending on a network condition, transmission to the SMB server may damage the scanned data. Make sure that the scanned data are not damaged. bizhub PRESS C7000/C6000 4-7