Konica Minolta bizhub PRO 1200/1200P bizhub PRO 1051/1200 Quick Guide - Page 118
SMB Setting, To enable SMB setting is necessary to use the SMB printing function and
View all Konica Minolta bizhub PRO 1200/1200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 118 highlights
About the network setting of this machine Chapter 6: Appendix SMB Setting To enable SMB setting is necessary to use the SMB printing function and the Scan to SMB function. 1. Touch [04 Network Settings] on the Administrator setting menu. 2. Touch [02 Controller NIC Setting]. 3. Touch [06 SMB Setting]. ● In case of use of the SMB printing function: Go to Step 4 4. Touch [Enable] for [Print Setting]. ● In case of use of the Scan to SMB function: Go to Step 8 5. Enter the NetBIOS Name on the screen displayed by touching of [Change] for [NetBIOS Name] and touch [OK], if necessary. 6. Enter the Print Service Name on the screen displayed by touching of [Change] for [Print Service Name] and touch [OK]. [Next Page] [Next Page] 6-4
About the network setting of this machine
Chapter 6: Appendix
6-4
SMB Setting
To enable SMB setting is necessary to use the SMB printing function and the
Scan to SMB function.
1.
Touch [04 Network Settings] on the Administrator setting
menu.
2.
Touch [02 Controller NIC Setting].
3.
Touch [06 SMB Setting].
●
In case of use of the SMB
printing function: Go to
Step 4
●
In case of use of the Scan
to SMB function: Go to
Step 8
4.
Touch [Enable] for [Print
Setting].
5.
Enter the NetBIOS
Name on the screen
displayed by touching
of [Change] for [Net-
BIOS Name] and touch
[OK], if necessary.
6.
Enter the Print Service
Name on the screen
displayed by touching
of [Change] for [Print
Service Name] and
touch [OK].
[Next Page]
[Next Page]