Konica Minolta bizhub PRO 1200/1200P bizhub PRO 1051/1200 Quick Guide - Page 18
Loading Paper (Tray 1 and 2), Be sure that the machine is powered ON before withdrawing the tray.
View all Konica Minolta bizhub PRO 1200/1200P manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 18 highlights
Set the Paper to the tray Chapter 1: Preparation for Use Loading Paper (Tray 1 and 2) • Be sure that the machine is powered ON before withdrawing the tray. • Only one tray can be withdrawn at a time. 1. Withdraw the tray to be supplied with paper. 2. Open the feed roller. 3. Place paper on the tray with any curl turning up, then move the side guide plates and rear edge guide to the edge of the paper. ● Load paper with print side face down in the tray aligning it to the feed roller side of the tray. Press the lock release lever of the front side guide to move the side guides, and also move the rear guide to the edge of the paper. 4. Push in the tray until it locks into place. ● The indicator on the Machine Status Screen or Copy Screen will change to . 1-8