Kyocera C220N User Guide - Page 55

Troubleshooting Message Install MK KPDL error ## Press GO Load Cassette # (A4)/(PLAIN) † Load EF (A5)/(PLAIN)† Load MP Tray (A4)/(PLAIN)† Memory card err Insert again Memory overflow Press GO Corrective Action Replace Maintenance Kit which is displayed on the message display. Replacement of the maintenance kit is necessary at every 200,000 images of printing and requires professional servicing. Contact your service technician. Current print processing cannot continue because of occurrence of KPDL error which is categorized by ##. To print out an error report, display > Print KPDL err(s) from the menu system, and select On. Press [GO] to resume printing. You can abandon printing by pressing [CANCEL]. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time. The paper cassette matching the paper size and paper type of the print job is empty. Load paper into the paper cassette as displayed in place of #. Press [GO] to resume printing. If you want to print from a different paper source, press U or V to display Use alternative and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Handling > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] ([ENTER]) and printing starts. There is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the envelope feeder. Press [GO] to resume printing. (Note that feeding paper with a paper size which does not match the current paper size from the envelope feeder can cause a paper jam.) If you want to print from a different paper source, press U or V to display Use alternative and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Handling > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] ([ENTER]) and printing starts. There is no paper cassette installed in the printer that matches the paper size and paper type of the print job. Set paper in the MP tray. Press [GO] to resume printing. (Note that feeding the paper having a paper size which does not match the current paper size from the MP tray can cause paper jam.) If you want to print from a different paper source, press U or V to display Use alternative and you can change the source for paper feeding. After selecting a paper source and pressing [MENU], Paper Handling > appears. By pressing the U, the paper type settings menu appears. After setting the correct paper type, press [OK] ([ENTER]) and printing starts. The memory card is accidentally removed from the printer's memory card slot during reading. If you continue reading the memory card, insert the same memory card into the slot again. The printer again reads it from the beginning of the data. Also see Insert the same memory card. The total amount of data received by the printer exceeds the printer's internal memory. Try adding more memory. Press [GO] to resume printing. You can abandon printing by pressing [CANCEL]. If Auto Error Clear is set to On, printing will be automatically resumed after a preset period of time. OPERATION GUIDE 4-9