Kyocera FS-C2126MFP FS-C2126MFP Fax Operation Guide - Page 34

Placing Originals FAX Operation (Basic) 3 Place the originals on the glass surface or in the document processor. Refer to the machine's Operation Guide for placing originals. Dial the Receiving System FAX No. Entry: B b * [ Chain ] [ Detail ] 4 Enter the fax number of the receiving system using the numeric keys. NOTE: When you press the numeric keys to enter numbers, the screen changes to the entry screen for the fax number. NOTE: Up to 64 digits can be entered as the fax number of the receiving system. Spaces will be automatically inserted if you use Z at the end of the row to advance the cursor before entering more characters. Use Y or Z to move the cursor. To correct the number, press the Clear key to delete the digits one by one before reentering the number. To delete all entered digits and return to the default screen, press the Reset key. FAX No. Entry: A b 0123456789* [ Chain ] [ Detail ] Address Recall/Pause Pressing this key adds about three seconds of waiting time during dialing. For example, when dialing the receiving system on an external line, you can use this method to insert a pause before resuming dialing after you dial a specific number. Make detailed settings for sending as necessary. Press [Detail] (the Right Select key) to display the FAX Detail menu. Press the Y or Z key to select [Sub Address], [Encrypted TX], [TX Start Speed] or [ECM] and change settings, and then press the OK key. 3-4