Kyocera FS-C2126MFP FS-C2126MFP Fax Operation Guide - Page 73
On Hook, Manual RX], FAX Operation Advanced, Remote Switch Function,
View all Kyocera FS-C2126MFP manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 73 highlights
On Hook: * [Manual RX] FAX Operation (Advanced) 2 Lift the handset of the telephone. 3 Check if the telephone line has connected to the fax of the sending system. When you hear the fax tone The sending system is on fax. 1 Press the Status/Job Cancel key. 2 Press the On Hook key. 4 3 Press [ManualRX] (the Left Select key). Reception will start. NOTE: When using a telephone set that can send tone signals, use the telephone to start the reception of originals with the remote switch function. (Refer to Remote Switch Function on page 4-14.) When you hear a voice from the receiving system The telephone line has connected to the telephone of the sending system. When the conversation is over, follow steps 1 to 2 above. After the sending system has started transmission, the machine starts receiving originals. 4 When reception starts (when the Processing indicator on the operation panel starts blinking), return the handset to its original position. 4-13