Kyocera FS-C2126MFP FS-C2126MFP Fax Operation Guide - Page 36

FAX Operation (Basic) Selecting the Resolution 5 Select the resolution suitable for sending originals. •200 × 100 dpi (Normal): when sending originals with standard size characters Typical character size: 10.5 point (example: Resolution Resolution) •200 × 200 dpi (Fine): when sending originals with relatively small characters and thin lines Typical character size: 8 point (example: Resolution Resolution) •200 × 400 dpi (Super Fine): when sending originals with minute characters and lines Typical character size: 6 point (example: Resolution ) Resolution •400 × 400 dpi (Ultra Fine): when sending originals with minute characters and lines more finely Typical character size: 6 point (example: Resolution ) Resolution NOTE: The default setting is 200 × 100 dpi (Normal). The higher the resolution, the clearer the image. However, higher resolution also means longer send times. Normally, 400 × 400 dpi (Ultra Fine) is recommended. The scan resolution should be equal to or higher than the fax resolution. If the selected resolutions are not in this condition, the machine automatically adjusts the resolution and changes the selection. FAX Resolution: a b *1***2*0*0*x*1*0*0*d*p*i**N*o*r*m*.*** 2 200x200dpi Fine 3 200x400dpi S.Fin 1 Press the Function Menu key. 2 Press the U or V key to select [FAX Resolution]. 3 Press the OK key. 4 Press the U or V key to select the desired resolution. 5 Press the OK key. 3-6