Kyocera KM-3035 Printer Accounting Systems Settings Guide - Page 17

Accounting System Settings Guide Chapter 2 Setting Up the Accounting System EDAD-EnD of accounting Administrator mode Function This command sets the Accounting function administrator mode to OFF. Command/Parameter Command Parameter ACNT "EDAD"; - Example of Use See ADMN on page 16. Description • Exits the Accounting function administrator mode. • Also exits from the Accounting function administrator mode at a time when a job is completed, such as by returning to the JOBT command, UEL or ready, in the same manner as when the ACNT "EDAD"; command is issued. CODE-accounting CODE registration and setting Function This command registers an account code. Command/Parameter Command Parameter ACNT "CODE", #1; #1 0-99999999: Account code to be registered (numeric string consisting of 1 to 8 digits) Examples of Use The following registers account code "00000001": !R! ACNT "ADMN", "123456789012345"; ACNT "CODE", "00000001"; ACNT "EDAD";EXIT; The following executes printing using account code "00000001": !R! ACNT "CODE", "00000001"; JOBS 0, 3, 1, 0; TEXT "PAGE 1";PAGE;TEXT "PAGE 2";PAGE;TEXT "PAGE 3";PAGE; JOBT;EXIT; Description • Registers an account code between the ACNT "ADMN"; and ACNT "EDAD"; commands. • If an account code is specified other than between the ACNT "ADMN"; and ACNT "EDAD"; commands, it is used to specify an account code for a print job. • To change an account code already registered, delete that code first and then register it again. • Printing is enabled by adding an already registered account code to a print job with the ACNT "CODE"; command. • This is valid for a job enclosed with the JOBS - JOBT commands immediately after the ACNT "CODE"...; command is issued. 17