Kyocera KM-3035 Printer Accounting Systems Settings Guide - Page 27

ACLR-Auto CleaR managemet Accounting System Settings Guide Chapter 2 Setting Up the Accounting System Function This command sets whether or not the front panel menus of the Accounting function are automatically cleared. Command/Parameters Command Parameter ACNT "ACLR", #1, #2; #1 "MAIN": Auto clear ON/OFF "TIME": Time until auto clear operation is executed #2 #1: "MAIN" Default value: 1 0: OFF 1: ON #1: "TIME" Default value: 12 1-54: Time until auto clear operation is executed (units of 5 sec.) Examples of Use The following sets the auto clear operation to OFF: !R! ACNT "DMN", "123456789012345"; ACNT "ACLR", "MAIN", 0; ACNT "EDAD";EXIT; The following sets the time until the auto clear operation is executed to 30 seconds: !R! ACNT "ADMN", "123456789012345"; ACNT "ACLR", "IME", 6; ACNT "EDAD";EXIT; Description • MAIN: auto clear MAIN switch • TIME: TIME until auto clear • The auto clear operation can be set between the ACNT "ADMN"..., and ACNT "EDAD"; commands. • The time setting will not take effect if the auto clear operation is OFF. • The setting of the auto clear operation is not related to the setting of the auto clear operation for normal menus other than for accounting. • This setting applies only to menus that are called up by entering an administration ID and does not apply to menus accessed by entering account codes during e-MPS job output, even if such menus are related to the Accounting function. 27