Kyocera KM-3035 Printer Accounting Systems Settings Guide - Page 23

Accounting System Settings Guide Chapter 2 Setting Up the Accounting System SECR-accounting SECuRity level CTMD-CounT MoDe Description • Because this is the switch for the entire Accounting function, even if the account code, the maximum number of copy and other parameters are set up, settings made will not take effect unless this switch is set to ON. • Even if this switch is OFF, settings such as the registration of an account, the maximum number of copy or other can be performed. • The Accounting function can be set to ON/OFF between the ACNT "ADMN"; and ACNT"EDAD"; commands. • If the number of registered accounts is 0, the Account Management function cannot be set to ON. Function This command sets the security level of the Accounting function. Command/Parameter Command Parameter ACNT "SECR", #1; #1 Default value: 0 0-1: Security level Example of Use The following sets the security level of the Accounting function to 1: !R! ACNT "ADMN", "123456789012345"; ACNT "SECR", 1; ACNT "EDAD";EXIT; Description • The security level setting is valid for SNMP access. (For details, refer to the SNMP Specifications.) • The security level can be set between the ACNT "ADMN"; and ACNT "EDAD"; commands. Function This command sets the count method for each paper size. Command/Parameters Command Parameter ACNT "CTMD", #1, #2, #3; #1 "SIZE": By paper size "BLPG": Number of pages/sheets #2 #1: "SIZE" Paper size (Numbers are in accordance with SPSZ. See the table on page 25.) #1: "BLPG" Fixed at 0 (Don't care) #3 #1: "SIZE" See the table below for a list of default values by paper size. 1: Single count 2: Double count #1: "BLPG" Default value: 0 0: Count using the number of pages 1: Count using the number of sheets 23