Kyocera KM-3035 Printer Accounting Systems Settings Guide - Page 29

Accounting System Settings Guide Chapter 2 Setting Up the Accounting System Examples of Use Set itemized paper counter 3 to "Letter" paper size and "Treated paper" paper type. !R! ACNT "ADMN", "123456789012345"; ACNT "ATRC", 3, 6, 14; ACNT "EDAD";EXIT; Count itemized paper counter 5 as an unused counter. !R! ACNT "ADMN", "123456789012345"; ACNT "ATRC", 5, 0, 0, 0, 0; ACNT "EDAD";EXIT; Description • Sets the itemized paper counter between the ACNT "ADMN"; and ACNT "EDAD" commands;. • If paper which does not meet the conditions for any of the itemized paper counters, 1 through 5 is printed, then the count on counter 6 ("other") is incremented. • If a counter has a specified paper size but no paper type setting, all prints at the specified paper size are counted, regardless of the paper type. • If a counter has a specified paper type but no paper size setting, all prints with the specified paper type are counted, regardless of the paper size. • To determine which counter is applicable, the paper size and paper type are determined starting with the first counter and continuing in sequence. If none of the counters 1 through 5 are applicable, then the count is applied to the "other" counter. • If multiple counters have the same settings, the count is incremented only on the counter having the lowest number. For example, if the first counter is set to plain paper with no paper size setting, and the second counter is set to plain paper with A4 size, only the count on the first counter will be incremented even during A4/ plain pages printing. (Counters with no settings should be moved to the rear.) • If a counter has no settings at all, its count is not incremented. (The counter is treated as unused.) • The default settings for the itemized paper counters are as follows. Counter Number Europe US 1 A3 Ledger 2 A4 Legal 3 A5 Letter 4 Legal Statement 5 Letter (No setting) 29