Kyocera TASKalfa 7550ci 6550ci/7550ci Operation Guide Rev-1.2011.5 - Page 120
Mixed Size Stapling, Basic Operation, Mixed Size Originals on Booklet
View all Kyocera TASKalfa 7550ci manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 120 highlights
Basic Operation Follow the steps as below for stapling. 1 Press the Copy key. 2 Place the originals on the platen. Staple/Punch Staple Off Original Zoom Paper : A4 : 100% : A4 Preview Punch Off Status Add Shortcut NOTE: When performing Mixed Size Stapling, refer to Mixed Size Originals on page 4-6. 3 Press [Org./Paper/Finishing] and then [Staple/ Punch]. Copies 4 Select the staple position. Top Left Top Right 2 staples Left 2 holes Left 2 holes Top 2 holes Right 2 staples Top 2 staples Right Saddle Stitch 3 holes Left 3 holes Top 3 holes Right Cancel Top Edge on Top Original Orientation OK 10/10/2010 10:10 NOTE: To use saddle stitching, press [Saddle Stitch]. When placing originals, be sure to place the cover page at the bottom. For more information on saddle stitching, refer to Booklet on page 4-20. 5 Press [Original Orientation] to choose orientation of the originals, either [Top Edge on Top] or [Top Edge on Left]. Then press [OK]. 6 Press [OK]. 7 Press the Start key. Copying begins. Mixed Size Stapling Even with mixed paper sizes, if the sizes have the same width or same length as shown in the combinations below, the output can be stapled. The maximum number of sheets that can be stapled is 30. A4 A3 B5 B4 Letter Ledger • A3 and A4 • B4 and B5 • Ledger and Letter • Ledger and Letter-R • 8K and 16K A4 A3 B5 B4 Letter Ledger Letter-R Legal Letter-R Legal 3-20