Kyocera TASKalfa 7550ci 6550ci/7550ci Operation Guide Rev-1.2011.5 - Page 321

Default Setting (System Menu) Paper Output Select the output tray respectively for copy jobs, print jobs from Custom Box, computers, and FAX RX data. The options are as follows. Output Tray Descriptions Tray A, Tray B, Tray C Upper Left Tray* FLower Left Tray* Right Tray Tray 1 to 7 Delivery to trays A - C of the optional document finisher. Delivery to the upper left tray or lower left tray of the machine. Delivery to the right tray of the machine. Delivery to trays 1 to 7 in the optional mailbox (tray 1 is the top tray). * This cannot be selected when the optional document finisher is installed. NOTE: The optional document finisher is required. When [Heavy 3] (164 g/m2 - ) or higher is set in Paper Weight and Mailbox (Option) is set for the output destination, the output destination is automatically changed to a tray that can be used. FAX RX data output can be specified when the optional fax kit is installed. IMPORTANT: If you want to enable the changed defaults immediately, move to the function screen and press 9 the Reset key. Use the procedure below to select the output tray. 1 Press the System Menu key. 2 Press [Common Settings] and then [Next] of Paper Output. 3 Press [Change] of Copy/Custom Box, Printer, or FAX Port 1 or FAX Port 2. NOTE: FAX Port 1 appears when the optional fax kit is installed. If you have 2 optional fax kits installed, Fax Port 2 appears. You can specify the output tray for the second kit (Dual FAX). 4 Select the Output Tray. 5 When changing the output tray of Copy/Custom Box, move to the copy or document box screen and press the Reset key. 9-15