Kyocera TASKalfa 7550ci 6550ci/7550ci Operation Guide Rev-1.2011.5 - Page 329

Default Setting (System Menu) Border Erase Default Set the default width to be erased as a border. The table below shows the measurement ranges that can be set. Input units Inch Metric Range 0 to 2" (in 0.01" increments) 0 mm to 50 mm (in 1 mm increments) NOTE: Refer to page 4-18 and page 6-26 for Border Erase. Use the procedure below to set the default border erase width. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Border Erase Default. 3 Press [+] or [-] for the Border and Gutter width to erase. You can use the numeric keys to enter the number directly. 4 Press [OK]. Border Erase to Back Page Select the Border Erase Method for Back Page of a sheet. The table below shows the available settings. 9 Item Same as Front Page Do Not Erase Description Border Erase performed in the same setting as the front page No Border Erase performed on the back page NOTE: Refer to page 4-18 and page 6-26 for Border Erase. Use the procedure below to specify the border erase setting for the back side of the original page. 1 Press the System Menu key. 2 Press [Common Settings], [ ], [Next] of Function Defaults, [ ] and then [Change] of Border Erase to Back Page. 3 Press [Same as Front Page] or [Do Not Erase]. 4 Press [OK]. 9-23