Kyocera TASKalfa 7550ci 6550ci/7550ci Operation Guide Rev-1.2011.5 - Page 403

Default Setting (System Menu) Protocol Detail The table below lists the network related function settings. The network related functions are available when TCP/IP is On. Item Description Default Setting Restarting the System* NetBEUI Selects whether or not to receive documents using On Y NetBEUI. LPD Select whether or not to receive documents using LPD as On Y the network protocol. SMTP Select whether or not to send e-mail using SMTP. Off N (E-mail TX) POP3 Select whether or not to receive e-mail using POP3. Off N (E-mail RX) FTP Client Select whether or not to send documents using FTP. On N (Transmission) When selecting [On], set the FTP Port Number. Use the FTP default port 21. Port:21 FTP Server (Reception) SMB Client (Transmission) Select whether or not to receive documents using FTP. On Select whether or not to send documents using SMB. On When selecting [On], set the SMB default Port Number. Use the SMB default port 139. For Windows Vista, use 445. Port:139 Y N 9 i-FAX LDAP Select whether or not to use i-FAX. Select whether or not to use LDAP. On N Off N SNMP Select whether or not to communicate using SNMP. On Y SNMPv3 Select whether or not to communicate using SNMPv3. Off Y HTTP Select whether or not to communicate using HTTP. On Y HTTPS Select whether or not to communicate using HTTPS. On Y SSL must be set to [On] in SSL on page 9-100. IPP Select whether or not to communicate using IPP. When Off Y selecting [On], set the IPP default Port Number. Use the IPP default port 631. Port:631 IPP over SSL Select whether or not to use IPP over SSL. Off Y SSL must be set to [On] in SSL on page 9-100. Raw Port Select whether or not to receive documents using Raw Port. On Y ThinPrint Select whether or not to communicate using ThinPrint. If set On Y (UG-31) to [On], you can set the port number that ThinPrint uses. Normally 4,000 is used. SSL settings can also be selected. * Y: The machine must be restarted after the setting is changed. N: The machine does not need to be restarted after the setting is changed. 9-97