Kyocera TASKalfa 7550ci 6550ci/7550ci Operation Guide Rev-1.2011.5 - Page 383

Default Setting (System Menu) Panel Reset Timer If you select [On] for Auto Panel Reset, set the amount of time to wait before Auto Panel Reset. Options are between 5 and 495 seconds (every five seconds). NOTE: If you select [Off] for Auto Panel Reset, the time display does not appear. Use the procedure below to set the reset time. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Panel Reset Timer. 3 Press [+] or [-] to enter the time until Auto Panel Reset is turned on. You cannot use the numeric keys to enter this value. 4 Press [OK]. Low Power Timer You can specify the amount of time to wait before Auto Low Power Mode. Specify a value from 1 - 240 minutes (1 minute increments). For more information on Low Power Mode, refer to the Low Power Mode and Auto Low Power Mode on page 211. Use the procedure below to set the Low Power Mode. 9 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Low Power Timer]. 3 Press [+],[-] or the numeric keys to enter the time until Low Power Mode is turned on. 4 Press [OK]. Auto Sleep If no job runs for a certain period of time, automatically enter Sleep Mode. Refer to Sleep and Auto Sleep on page 2-12 for Sleep. Auto Sleep Select whether to use Auto Sleep or not. NOTE: Time remaining before Auto Sleep can be modified as necessary. Use the procedure below to specify the auto sleep setting. 1 Press the System Menu key. 2 Press [ ], [Date/Timer] and then [Change] of Auto Sleep. 3 Press [Off] or [On]. 4 Press [OK]. 9-77