LG 32LD655H Owners Manual - Page 102
Lt2002 Cloning Learning Setup, Warning
View all LG 32LD655H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 102 highlights
COMMERCIAL MODE SETUP TLL-1100A CLONING CONNECTIONS/LEARNING SETUP Connections for the TLL-1100A Clone Programmer to Learn the TV Master TV Setup On Master TV Set up all Master TV features in the menus and do a Channel Search. Add Channel and Aux labels etc. See previous page. Insert an MPI cable into the TV's MPI port. On TLL-1100A 1. Turn On the TLL-1100A. 2. Use the Mode button to select Clone Mode. 3. Use the Left/Right arrow to select the CBank (1 - 8) to store the master setup in. 4. Plug the other end of the MPI cable into the MPI port on the bottom of the TLL. 5. With the Installer remote control, select item 1 on TLL menu. 6. Press Enter, to transfer the Master setup into CBankX on the TLL. The TLL will copy the master setup. 7. When learning is done, disconnect MPI cable from Master TV. 8. Reconnect TV power cord. Power the TV On and the master setup should be resident on the TV. CLONE SELECTION MENU Selected Bank: CBank X Saved (1) LEARN FROM TV (2) TEACH TO TV (3) SET CLONE CLOCK FROM TV (4) SET TV CLOCK FROM CLONE (5) DISPLAY TV SETUP (6) DISPLAY CLONE SETUP CLONE CLOCK = 00:00 TV CLOCK = 00:00 THE CLONE IS VERSION V2.2.2 -To change menu items, Press channel keys or digits. -To execute item, Press ENTER. TV Link Loader-Demo TLL1100A Ready MODE MENU ENTER RECEIVE SEND TLL1100A M.P.I. Learning Setup Antenna (or CATV) TV Link Loader-Demo TLL1100A Ready MODE MENU ENTER RECEIVE SEND TLL1100A M.P.I. Teaching Setup Antenna (or CATV) CLONE SELECTION MENU Selected Bank: CBank X Saved (1) LEARN FROM TV (2) TEACH TO TV (3) SET CLONE CLOCK FROM TV (4) SET TV CLOCK FROM CLONE (5) DISPLAY TV SETUP (6) DISPLAY CLONE SETUP CLONE CLOCK = 00:00 TV CLOCK = 00:00 THE CLONE IS VERSION V2.2.2 -To change menu items, Press channel keys or digits. -To execute item, Press ENTER. On Target TV 1. Connect MPI cable from the TLL to the MPI port on the Target TV. Assure that the correct CBank(X) is selected on TLL.. 2. With the Installer remote control select item 2, to Teach the target TV the master TV setup. 3. Press Enter to begin teaching. 4. When Teaching is done, disconnect MPI cable and power the TV Off. Unplug TV power cord. 5. Reconnect TV power cord. Power the TV On and the master setup should be resident on the TV. Warning G Do not use the TLL-1100A while any PPV card is installed in the TV or the clone programmer device will be damaged. ! NOTE G It is assumed that the TV is connected to a signal source, the TV source selected is Antenna (RF) In, the signal is from an Analog channel, not a digital channel, all equipment is connected to power and turned on and the TLL Cloner main menu is displayed on the TV screen, see above. G If an analog channel is not available, tune the TV to an Aux source like AV-1 for cloning purposes. COMMERCIAL MODE SETUP 102