LG 32LD655H Owners Manual - Page 25
MPI CARD SLOT / PPV CARD INSTALLATION Except 47/55LD650H, MPI Card Removal / PPV Card Installation
View all LG 32LD655H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 25 highlights
PREPARATION MPI CARD SLOT / PPV CARD INSTALLATION (Except 47/55LD650H) The MPI card is equipped with an RF jack for antenna/cable signal source connection. This card can be removed and replaced with a third-party PPV (Pay-Per-View) card. MPI Card Removal / PPV Card Installation 1. Remove the two MPI card retainer screws. 2. Pull out current MPI card far enough so that the RF cable can be detached from the old card. 3. Detach RF cable. 4. Place new PPV card into slot and slide it in far enough to reconnect RF cable. 5. Insert card all the way into the slot making sure it is fully seated into back plane connector. 6. Replace the two card retainer screws. ANTENNA IN M.P.I. RF CABLE M.P. I. Card Slot WARNING G There is an RF cable connected to the back of the card. Remove the card slowly. 25