LG 32LD655H Owners Manual - Page 99
COMMERCIAL MODE SETUP FOR MASTER TV, Set 093 RJP Available to 001 if - installer remote
View all LG 32LD655H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 99 highlights
COMMERCIAL MODE SETUP FOR MASTER TV This page provides an overview of a Master TV configuration. Note 1: Disconnect all Aux inputs. Under certain conditions, Auto Tuning (Channel search) is disabled if there is an Aux input active. Commercial Mode Setup Procedure 1. Set Installer Menu Items (Enter TV Installer Menu, see Installer menus for detailed instructions.) a. Set Installer menu item 117 FACT DEFAULT, to 001 and press ENTER on Installer remote. (This clears all installer menu custom settings, channel labels / icons etc. and reloads the factory default settings.) b. Set Item 003 BAND/AFC. - Broadcast: set to 000. - HRC: set to 002 - CATV: set to 001. - IRC: set to 003 c. Set item 028 CH OVERIDE to 001. This allows access to chan- nel search, Auto Tuning and Channel List/Edit options in the Channel Menu. d. Set other particular installer items that affect your TV programming network. Enable/Disable Aux sources, set a Gem Start Channel etc. e. After all required installer menu item settings have been adjusted, press ENTER on the remote to remove Installer Menu. For 32/37/42LG710H xxLG710H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 For 32/37/42/47/55LD650H xxLD650H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 For 32/37/42LD655H xxLD655H PTC INSTALLER MENU 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Typical TV Installer Menu 117 FACT DEFAULT 00X 003 BAND/AFC 00X 028 CH. OVERIDE 001 2. Set Up TV Features (Channel, Picture, Audio, Lock, Time, Option, Digital Captions etc. See TV Clonable options list and TV menus pages.) Adjust the settings for these Installer Menu Items 3. Run Auto Tuning (Channel Search) (Search for all available channels.) Go to the Channel menu and access the Auto Tuning option, follow onscreen instructions. a. Edit Channel Scan. In the Channel Menu, access Channel Edit option. I Add/Delete channels per your system requirements. Note: Physical channel numbers are used to identify Virtual channels. I Add familiar channel trademarks/logos like ABC, CBS, NBC etc. to the Channel-Time onscreen display. In the Channel menu, select the Channel Label option. Add identifiable labels (logos) for the end user to readily know what common networks are available. DIGITAL 19-3 MONO STEREO SAP WXYZ Custom Text Label 'WXYZ' created in 2-5-4 + Menu (Add Channel Label) Mode 4. Transfer TV Setup to Internal TV Controller: 2-5-5 + Menu Mode After the TV channel scan has been edited and channel label icons added, enter the Installer menu. Once in the Installer menu, press 2-55 and MENU on the remote. This transfers the TV setup to the internal controller box. 5. AddCustomChannelLabelsforAnalogChannels:2-5-4+MenuMode Enter Installer menu, press 2-5-4 and MENU. Add your own custom text labels to channel onscreen displays. Note: Digital Channels often have a broadcaster generated label. (See 2-5-4+Menu pages.) When finished, to exit 2-5-4+Menu mode, press MENU. Verify TV Setup At this point, verify that the channel lineup, channel icons and custom labels are correct. Make sure the TV features are set per your requirements. Set item 028 Ch Overide to 000 to lock the channel scan. After the preceding has been completed, the Master TV setup is ready to be copied to a Clone Programmer, see cloning options pages. 093 RJP AVAILABLE 001 Set 093 RJP Available to 001 if using a remote jack pack 028 CH. OVERIDE 000 After Master TV setup has been completed, set item 028 Ch Overide to 000. COMMERCIAL MODE SETUP 99