LG 32LD655H Owners Manual - Page 111
Reference: Procedures For Adding Channel Labelicons/custom Channel Labels (2-5-4 + Menu Mode)
View all LG 32LD655H manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 111 highlights
090 - KEY LOCK If set to 1, display panel keyboard is locked out, not available to end user. IR receiver remains functional. 091 - YPrPb2 (HDMI2 Enable) Set to 0 to disable display panel HDMI2 input. Set to 1 to enable DTV mode. Set to 2 to enable PC mode. 093 - RJP AVAILABLE (Remote Jack Pack Available) 0 = Remote jack pack is not available or disabled. 1 = Legacy Model RJPs: HDMI Mode Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI. Audio stream is expected from HDMI source. If no audio is present, no audio will be heard. 2 = Legacy Model RJPs, DVI Mode Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI however, Audio is from selected audio source, based on the RJP's audio hierarchical priority. 5 = Scaler Model RJPs, HDMI Mode Enables RJP when an HDMI cable is inserted into RJP. VIdeo is from HDMI. Audio stream is expected from HDMI source. If no audio is present, no audio will be heard. 6 = Scaler Model RJPs, DVI Mode Enables RJP when an HDMI cable is inserted into RJP. Video is from HDMI however, Audio is from selected audio source, based on the RJP's audio hierarchical priority. Notes : I See Reference section, RJP Input Hierarchy and RJP Models page. I If set to 1, 2, 5 or 6, item 040 Auto Camport is automatically set to 0. Settings 1, 2, 5 and 6 allow the lodge staff to customize each TV's RJP setup based on customer requirements. 094 - SAP MENU EN (2nd Audio Program) Set to 1 to enable SAP feature on Function menu, if Function menu is available. Set to 0 to disable SAP feature on Function menu, if Function menu is available. 096 - DEF. ASP. RATIO (Default Aspect Ratio) Selects default aspect ratio at power up, see settings below. Set to 0 "Set By System". Set to 1 for 4:3. Set to 2 for 16:9 (Factory Default). Set to 3 for 'Just Scan' Set to 4 for Zoom 201 Automatic Static Backlighting. 202 Automatic Dynamic Backlighting. Set to between 101 and 200, TV automatically controls backlighting depending upon the picture level of the current program. Set to 201, TV automatically controls backlighting depending upon external spectral sensitivity. Set to 202, TV automatically controls backlighting depending upon external spectral sensitivity and picture level of the current program. Set to 255, to disable power saving mode. 102 - ATSC BAND Sets up TV to receive different types of incoming signals: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC, 4=Same as NTSC. 103 - ATSC TUNE MODE Sets ATSC tuning mode: Default set to 1 for Physical channel scan. Set to 0 for Virtual Channel scan. 104 - START MINOR CHANNEL Sets XX-XX minor start channel number at power up: 0=NTSC. If not 0, number selected is the Minor start channel number. 106 - ASP RATIO LOCK (Aspect Ratio Lock) Set to 1 to retain previous aspect ratio with power Off. Set to 0 to retain default aspect ratio with power Off. See item 96 Default Aspect Ratio above. 116 - VIDEO MUTE EN (Video Mute Enable) Set to 0 for normal. Set to 1 for blank. 117 - FACT DEFAULT (Factory Default) Set to 0 for normal. Set to 1 to load presets to all of the previous item settings. WARNING: Setting this to 1 will reload the factory defaults and clear the channel list including erasing any assigned Channel Icons and custom channel Labels. 118 - POWER SAVING Default is set to 3. When TV is in Standby mode, MPI card slot is powered by Standby power supply and embedded BLAN is not powered. When TV is in Power On mode, MPI card slot is powered by main 12V power supply and embedded BLAN is powered. Note, TV must be powered on in order to communicate with the embedded BLAN module for configuration and control. 099 - BACK LIGHTING Sets the TV screen brightness at power up, see settings below. Default setting value is 202. 1 - 100 Static Backlighting. (1 = Dimmest picture, 100 = Brightest picture.) 101 - 200 Dynamic Backlighting. (101 = Dimmest picture, 200 = Brightest picture.) Notes : I See Reference section, B-LAN SETUP AND OVERVIEW page. 119 - DATA CHANNEL Sets the Data channel. Set the channel number that will provide data to the TV at turn on. Initially the TV may take several minutes to load program data from AC power off state. COMMERCIAL MODE SETUP 111