LG 32LG3DCH Setup Guide - Page 18

Installer Menu Use the Installer Menu to set up or change operational settings. See more detailed descriptions of the Installer Menu items on the pages that follow. Accessing the Installer Menu Make sure the TV is ON. Using an Installer Remote, press MENU repeatedly until the on-screen setup menus lock up, and then press 9-8-7-6 + OK (Enter) to access the Installer Menu. HOSPITAL PTC INSTALLER MENU The Installer Menu opens with item 000 INSTALLER SEQ 000. Use the Up/ Down arrow keys to sequence through the available menu items, or access an item directly by keying in the line number and then pressing MENU. For example, to access the SLEEP TIMER option, which is item 015, press 0-15 + MENU. To change a setting, use the Left/Right arrow keys, or enter a value directly. To save a setting, press OK (Enter). 000 INSTALLER SEQ 000 UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 Using the Installer Menu Typical TV Installer Menu Items 000 ~ 117 are immediately accessible upon entering the Installer Menu. Refer to the table below for an overview of Installer Menu items, including item numbers, functions, ranges, and default values. Installer Menu items not relevant to these TV series are not present on the Installer Menu; therefore, some numbers are missing. For example, item 006 will not appear. To exit the Installer Menu, press OK (Enter) again. Any changes you make will be stored in non-volatile memory. Installer Menu Items 000 through 025 Menu Item Function 000 INSTALLER SEQ 001 POWER MANAGE 002 AC ON 003 BAND/AFC Value Range 0 ~ 3 0 ~ 7 0 / 1 0 ~ 3 Default Value 0 0 0 1 004 STRT CHANNEL 0 ~ 127, 255 255 005 CHAN LOCK 0 / 1 0 007 STRT VOLUME 0 ~ 63, 255 255 008 MIN VOLUME 0 ~ 63 0 009 MAX VOLUME 0 ~ 63 63 010 MUTE DISABLE 0 / 1 0 011 KEY DEFEAT 0 / 1 0 012 IR BANKS EN. 0 / 1 0 013 SCAN MODE 0 / 1 1 014 STRT CH IN SM 0 / 1 0 015 SLEEP TIMER 0 / 1 1 016 EN TIMER 0 / 1 0 017 ALARM 0 / 1 1 020 FEATURE LEVEL 0 / 1 1 021 V-CHIP 0 / 1 1 022 MAX BLK HRS 0 ~ 99 12 023 CAPTION LOCK 0 / 1 0 025 FUNCTION PRE. 0 ~ 1 1 18 Brief Description of Function and Comments Leave default set to 0. Sets number of hours of no activity before automatic shutoff. Set to 1 to enable Auto Turn On when AC power is applied. Selects Tuning Band: 0=Broadcast, 1=CATV, 2=HRC, 3=IRC Channel tuned when TV is turned On. (Set to 255 to tune to channel tuned before TV turned Off.) If set to 1, cannot tune from current channel. Volume level when TV is turned On. (Set to 255 to use volume level before TV turned Off.) Sets minimum allowable volume setting. Sets maximum allowable volume setting. Set to 1 to disable Mute Function. Set to 1 to disable menu navigation keys on display panel. Set to 1 to enable TV to respond to IR code. Typically used for hospitals: Enables On/Off in Channel Up/Down sequence. Set to 1 to put TV On/Off below start channel number. Set to 1 to enable Sleep Timer. Set to 1 to enable On/Off Timers. Set to 1 to enable Alarm. Zen 1. Leave default set to 1 (1 Zen 1). Set to 1 to enable V-Chip (Parental Control) functions. Sets number of V-Chip blocking hours. Set to 1 to retain caption setting before TV turned Off. Controls channel preview in PPV function. 206-4096