LG 32LG3DCH Setup Guide - Page 44
Channel Banks Setup Troubleshooting
UPC - 719192174023
View all LG 32LG3DCH manuals
Add to My Manuals
Save this manual to your list of manuals |
Page 44 highlights
Troubleshooting (Cont.) Channel Banks Setup Troubleshooting CHANNEL PREVIEW - BANK 1 CH 011-001 NORMAL-ADDED Enter -> Change CC -> VCHIP Menu, Ch. Preview -> Exit Channel Banks Setup Menu Symptom Cause Solution Cannot change channel status in menu. Installer Menu item 028 CH. OVERIDE is set to 000 and/or Channel Access was denied in Express Script. Set CH. OVERIDE to 001 to allow access for channel status change. Channel Banks Setup Menu 2-5-5 + MENU procedure/Express Script does not appear. was not performed/completed. The Channel Banks Setup Menu will not be available until the TV setup is transferred to the PTC. Also, set Installer Menu item 028 CH. OVERIDE to 001 to allow access for channel status changes. Channel is blanked in all channel banks. Blanking a channel in one channel bank will make it blank in all channel banks. Cannot tune in deleted channel on Channel Banks Setup Menu. Select a channel bank where the deleted channel number is set to "Normal-Added." Direct enter the deleted channel number. Change to the bank in which you want to activate the channel. Select "Normal-Added" on the Channel Banks Setup Menu. "Inactive TV" message appears and then TV turns Off. TV is set up to display "Inactive TV" message if all channels are "Normal-Deleted" from Channel Bank 4. Select another channel bank (1, 2, or 3) to return TV to normal operation. Channel found in scan does Channel was deleted in currently selected not tune in with Channel Up/ channel bank. Down. If banks were set up, premium channels may only be available on another channel bank. Select the channel bank where the channel is set to "Normal-Added." Or, direct enter channel number; then go to Channel Banks Setup Menu and select "Normal-Added." When BANK on Installer Remote is pressed, TV shows Aux Sources Selection Menu. Installer Menu item 027 HOSPITAL MODE Set back to default "2" (LG3DCH) or to appropriate setting is set to 0. (LG3DDH) for channel banks to appear with BANK or INPUT key presses. 44 206-4096