LG 32LG3DCH Setup Guide - Page 36

Reference: Upgrading TV/PTC Software using a USB Memory Device Checking the Software Versions Note: This function is not accessible while the TV is in FTG or PPV Mode. You can check the software versions of the TV by accessing the Installer Menu with the Installer Remote: Press MENU repeatedly until the on-screen setup menus lock up, and then, press 9-8-7-6 + OK (Enter). When you are finished, press OK (Enter) again to exit the Installer Menu. HOSPITAL PTC INSTALLER MENU 000 INSTALLER SEQ 000 Typical Installer Menu UPN 000-000-000-000 FPGA E0F1 PTC V1.00.000 CPU V3.06.00 PTC Version CPU Version Upgrading TV/PTC Software Before you begin, note that the software upgrade files must be stored in a folder named "LG_DTV" in the root directory of the USB memory device. Also, ensure the USB device has been formatted with FAT format. Note for TV Software Upgrade only: If the TV detects a later version of software on the USB device, it will automatically display a dialog from which you can start the software upgrade immediately. Otherwise, you can close the dialog, and access the USB Download Menu as described below. 1. Turn the TV ON. 2. Plug the USB memory device into the USB IN port on the TV. 3. Press MENU on the Installer Remote to display the TV setup menus. 4. Use the arrow navigation keys to select/highlight either the Option (if the TV is in Pass-through Mode) or Lock (if TV is in FTG or LodgeNet PPV Mode) menu icon; then, press the number "7" key a total of seven times to display the USB Download Menu. 5. Use the Up/Down arrow keys to select Upgrade TV Software or Upgrade PTC Software, as applicable, and then press OK (Enter). 6. Use the Up/Down arrow keys to select the upgrade to install. Then, press OK (Enter). The TV will show update completion progress in a new window. Do NOT remove the USB device until the software upgrade is complete. When a TV software upgrade is complete, the TV will reset itself with an automatic restart. When a PTC upgrade is complete, the TV will turn OFF. USB Download Menu Upgrade TV Software Upgrade PTC Software Teach To TV Exit Enter i TV Software Update (Expert) [ Current TV Software Version Information ] epak : 3.15.0 rootfs(EVENT) : 0.00.1 model(EVENT) : 3.15.0 kernel(EVENT) : 0.00.1 lgapp(EVENT) : 0.00.1 lgres(EVENT) : 0.00.1 lgfont(EVENT) : 0.00.1 micom(EVENT) : 0.03.5 logo(EVENT) : 0.00.1 epak : 3.19.0 model(EVENT) : 3.19.0 lgapp(EVENT) : 3.19.0 lgfont(EVENT) : 0.00.1 xxLG3DDH_v3_19_usb rootfs(EVENT) : 0.00.1 kernel(EVENT) : 0.00.1 lgres(EVENT) : 0.00.1 boot(EVENT) : 3.19.0 i Upgrade PTC Software The following software files are found in the memory card. PTC_xxLG3DDH_v1.01.004 36 206-4096