LG 32LG3DCH Setup Guide - Page 31

Cloning Procedures Learning / Teaching a Master TV Setup using a USB Memory Device USB Cloning Notes • Read the IMPORTANT CLONING INFORMATION on page 30 before beginning any cloning procedures. • You may edit a filename as part of the Learning procedure; however, a file with edited contents will not be recognized. • It is not possible to clone a Master TV's clock using a USB memory device. Either set a Target TV's clock manually or use the Auto Clock setting in the TV setup menus. Learn Setup from Master TV 1. Ensure the Master TV is set up completely and in Pass-through Mode. 2. Plug the USB memory device into the USB IN port on the Master TV. 3. Press MENU to display the TV setup menus. 4. Use the arrow navigation keys to select/highlight the Option menu icon; then, press the number "7" key a total of seven times to display the USB Download Menu. 5. To gain access to the Learn From TV option in the USB Download Menu, key in the password used to enter the Installer Menu (Example: Press 9-8-7-6). 6. Use the Up/Down arrow keys to select Learn From TV, and then press OK (Enter). 7. To identify the profile from others, you can use the Up/Down arrow keys to change the last five digits of the filename. Press OK (Enter) when you are ready to initiate Learning. Learning status will be shown on the progress bar. When the Learning process is complete, the USB Download menu will reappear on screen. 8. Remove the USB memory device from the Master TV. USB Download Menu Upgrade TV Software Upgrade PTC Software Teach To TV Learn From TV Exit Enter Learn From TV Select the file name and press OK to start xxLG3DDH-UA00001.TLL ► ► Previous ! Learn From TV UPDATING... Do not unplug! Enter 25% Teach Master TV Setup to Target TV 1. Ensure the Target TV is in Pass-through Mode, and then plug the USB memory device with the Master TV Setup file into the Target TV USB IN port. 2. Press MENU to display the TV setup menus. 3. Use the arrow navigation keys to select/highlight the Option menu icon; then, press the number "7" key a total of seven times to display the USB Download Menu. 4. Use the Up/Down arrow keys to select Teach To TV, and then press OK (Enter). 5. Use the Up/Down arrow keys to select/highlight the Master TV Setup you want to install and press OK (Enter). Note: Filenames identify the TV and the TLL version (see figure at right). Teaching status will be shown on the progress bar. When the Teaching process is complete, the USB Download menu will reappear on screen. 6. When Teaching is done, remove the USB memory device, turn OFF the TV, and unplug the TV power cord for 15 seconds. 7. Reconnect the TV power cord, and turn ON the TV. The Master TV Setup should be resident on the Target TV. USB Download Menu Upgrade TV Software Upgrade PTC Software Teach To TV Learn From TV Exit Enter Teach To TV xxLG3DDH-UA00001.TLL Previous ! Teach To TV UPDATING... Do not unplug! Enter 50% 206-4096 31