LG 32LG3DCH Setup Guide - Page 19

Installer Menu (Cont.) Installer Menu Items 027 through 117 Menu Item Function Value Range Default Value Brief Description of Function and Comments 027 HOSPITAL MODE 0 ~ 2 (LG3DCH) 2 (LG3DCH) For LG3DCH, set to 2 (default). For LG3DDH, set according to the pillow speaker power 0 ~ 162, 254 (LG3DDH) 254 (LG3DDH) supply, audio source, and brand. See detailed instructions. 028 CH. OVERIDE 0 / 1 1 If set to 0, limits direct access to favorite channels. 029 OLD OCV 0 / 1 0 Set to 1 to change MPI operation to OCV. 030 ACK MASK 0 / 1 0 If set to 1, changes MPI for some OCV boxes. 031 POLL RATE 20 ~ 169 94 Selects poll rate for MPI. 032 TIMING PULSE 186 ~ 227 207 Sets baud rate for MPI. 034 CAMPORT EN 0 / 1 * 1 Set to 1 to enable Video 2 input. 035 COMPPORT EN. 0 / 1 1 Set to 0 to disable HDMI 1. Set to 1 enable HDMI 1. 038 YPrPb EN. 0 / 1 * 1 Set to 1 to enable display panel Component Video 1 input jacks. 039 REAR AUX EN 0 / 1 1 Set to 1 to enable display panel Video 1 input jack. 040 AUTO CAMPORT 0 / 1 * 1 Set to 1 to automatically switch to Camport. If set to 1, STRT AUX SRCE cannot be set to 2. 046 STRT AUX SRCE 1 ~ 4, 6, 255 ** 6 Sets the starting Aux source (if item 004 STRT CHANNEL is set to 0). 047 AUX STATUS 0 / 1 0 Set to 1 for MPI Aux source to be reported as a channel number instead of Channel 0. 053 DIS. CH-TIME 0 / 1 0 Set to 1 to disable Channel-Time display. 069 EN. CH-T COL. 0 / 1 1 Set to 1 to enable custom color for the Channel-Time display. 070 FOR. CH-TIME 0 ~ 7 2 Chooses custom foreground color for the Channel-Time display. 071 BCK. CH-TIME 0 ~ 7 2 Chooses custom background color for the Channel-Time display. 073 CH NOT AVBLE 0 / 1 0 If set to 1 and Channel Override is 0, "NOT AVAILABLE" message is displayed when directly accessing a channel not in the favorite Channel List. 075 REVERT CH 0 / 1 0 If set to 1 and loss of MPI communication occurs, TV tunes to Start Channel. 077 QUICK SHUTOFF 0 ~ 17 0 Allows TV timed power Off press and hold setup with pillow speaker channel button. 078 UPN MSB 0 ~ 255 0 User programmable number, most significant byte. 079 UPN MSB-1 0 ~ 255 0 User programmable number, most significant byte - 1. 080 UPN MSB-2 0 ~ 255 0 User programmable number, most significant byte - 2. 081 UPN LSB 0 ~ 255 0 User programmable number, least significant byte. 082 CHKSM ERROR 0 / 1 1 Enforces rigid MPI checksum. 083 HANDSHK TIME 0 ~ 5 5 Relaxes MPI timing to be compatible with PC-based Windows-controlled systems. 084 PERMANENT BLK 0 / 1 0 Removes block hours setting for Parental Control and makes block permanent. 087 REAR RGB EN. 0/2/18 (LG3DCH)* 2 (LG3DCH) 0/1/17 (LG3DDH)* 1 (LG3DDH) Set to 0 to disable RGB1. Set to 2 (LG3DCH) /1 (LG3DDH) to enable for RGB PC. Set to 18 (LG3DCH) /17 (LG3DDH) for Auto detect configure. 088 EN NOISE MUTE 0 / 1 1 If set to 1, audio is muted if no signal is present. 090 KEY LOCK 0 / 1 0 If set to 1, keyboard is locked out, IR is still functional. 094 SAP MENU EN 0 / 1 1 Set to 0 to disable feature on Function Menu. Set to 1 to enable feature on Function Menu. 096 DEF. ASP. RATIO 0 ~ 4 2 Sets default aspect ratio at power up. See detailed descriptions and item 106. 099 BACK LIGHTING 1 ~ 100, 101 ~ 200 200 (LG3DCH) Sets the level of the TV picture back lighting. Settings above 101 control dynamic back 100 (LG3DDH) lighting and disable power savings mode. 102 ATSC BAND 0 ~ 4 4 Selects ATSC band. 103 ATSC TUNE MODE 0 / 1 1 Set to 1 (default) for Physical Channel scan. Set to 0 for Virtual Channel scan. 104 START MINOR CH 0 ~ 255 0 Selects Minor Start Channel. Set to 0 for NTSC. 106 ASP RATIO LOCK 0 / 1 0 To retain set aspect ratio on power cycle, set to 1. Set to 0 for default ratio on power cycle. 116 VIDEO MUTE EN 0 / 1 0 Set to 0 for Normal. Set to 1 for Blank. 117 FACT DEFAULT 0 / 1 0 Set to 0 for Normal. Set to 1 to load presets for all Installer Menu settings. * Not applicable for 22LG3DCH/22LG3DDH. ** 1, 3, 255 for 22LG3DCH/22LG3DDH 206-4096 19