LG BD270 Owner's Manual (English) - Page 33

BD350-N_AUSALLK_MFL62745201 8/20/09 5:19 PM Page 33 Troubleshooting Symptom No power. The power is on, but the player does not work. No picture. No sound. The player does not start playback. The Remote Control does not work properly. Possible Cause • The power cord is disconnected. • No disc is inserted. Correction • Plug the power cord into the wall outlet securely. • Insert a disc. • The TV is not set to receive video signal output. • Select the appropriate video input mode on the TV. • The video cable is not connected securely. • Connect the video cable securely. • The selected resolution is not capable with your TV. • Select another resolution using RESOLUTION button. • The equipment connected with the audio cable is not set to receive disc signal output. • Select the correct input mode of the audio receiver so you can listen to the sound from the player. • The power of the equipment connected with the audio cable is turned off. • Turn on the equipment connected with the audio cable. • The [AUDIO] options are set to the wrong position. • Set the [AUDIO] options to the correct position (see page 21). • The player is in reverse play, fast forward, slow motion • Return to the normal playback. or pause mode. • The disc is upside down. • Insert the disc with the playback side down. • An unplayable disc is inserted. • Insert a playable disc. (Check the disc type and regional code.) • The rating level is set. • Change the rating level. • The disc was recorded on another unit and was not finalized. • Finalize the disc on that unit. • The Remote Control is not pointed at the remote sensor on the player. • Point the Remote Control at the remote sensor of the player. • The Remote Control is too far from the player. • Operate the Remote Control closer to the player. 33